{"title":"Modular Synth Gear \u0026 Gifts for Eurorack Lovers","description":"\u003cp\u003eDiscover gifts for modular synth enthusiasts, including Eurorack modules, patch cables, sequencers and creative tools for building unique sounds.\u003c\/p\u003e","products":[{"product_id":"4ms-rcd-breakout","title":"4MS RCD BREAKOUT","description":"\u003cp\u003eThe breakout module for the Rotating Clock Divider has to be connected to the internal jumpers of the RCD and allows for switching the division factors, counting direction and automatic reset.\u003c\/p\u003e\n\u003cp\u003eThe RCD Breakout adds features to the Rotating Clock Divider module. Six switches allow you to set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function, and does not use any extra power.\u003c\/p\u003e\n\u003cdiv id=\"featurestab\" class=\"tab_content\"\u003e\n\u003cstrong\u003e\u003cspan class=\"large1\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDivide-by-1 to Divide-by-64, on 8 output jacks\u003c\/li\u003e\n\u003cli\u003eCV Rotate jack to shift divide-by amount on each jack\u003c\/li\u003e\n\u003cli\u003eCV Reset jack to reset\/re-sync all jacks\u003c\/li\u003e\n\u003cli\u003eOptional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate\/Trigger, Up\/Down-counting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan class=\"large1\"\u003eJacks\u003c\/span\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eClock Input (5V to 15V clock, rising edge triggered), max 3kHz\u003c\/li\u003e\n\u003cli\u003eCV Rotate (0V to +5V input)\u003c\/li\u003e\n\u003cli\u003eCV Reset (5V to 15V trigger)\u003c\/li\u003e\n\u003cli\u003eDivided Clock Outputs (8 jacks):\n\u003cul\u003e\n\u003cli\u003eDivide-by-(1+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(2+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(3+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(4+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(5+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(6+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(7+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(8+R)\u003c\/li\u003e\n\u003c\/ul\u003e\n...where R is the CV Rotation.\u003c\/li\u003e\n\u003cli\u003eSelectable Gate\/Trigger mode:\u003c\/li\u003e\n\u003cli\u003eSelectable Divide range up to Divide-by-64:\u003cbr\u003e Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.\u003c\/li\u003e\n\u003cli\u003eSelectable Auto-reset:\u003cbr\u003e Auto-reset will reset the divide counter every 16\/24\/32 clocks, which keeps the beats more \"dance-able\" even when using the \"weird\" clock divisions (3\/5\/6\/7\/9\/10\/11\/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The RCD is 4HP and 48mm (1.85\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail: __mA\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003e-12V rail: not used\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -171px; top: -20px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307292364989,"sku":"1015550","price":130.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msrcdbreakout.jpg?v=1625885428"},{"product_id":"4ms-rotating-clock-divider","title":"4MS Rotating Clock Divider","description":"\u003cp\u003eThis colourful module is an update on the classic clock divider design, offering even and un-even divisions of 1 to 64 and a unique rotate function to shift the resulting triggers along its eight outputs.\u003c\/p\u003e\n\u003cp\u003eThe Rotating Clock Divider (RCD) produces eight divided clock tempos from a single input clock. The divisions range from \/1 to \/64, including all odd and non-standard divisions such as \/3 and \/17 and \/62. A Rotate CV input re-assigns the division number of each jack, allowing for creative mix-ups and experimentation. A Reset input jack helps to sync\/start with an external clock.\u003c\/p\u003e\n\u003cdiv id=\"featurestab\" class=\"tab_content\"\u003e\n\u003cstrong\u003e\u003cspan class=\"large1\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDivide-by-1 to Divide-by-64, on 8 output jacks\u003c\/li\u003e\n\u003cli\u003eCV Rotate jack to shift divide-by amount on each jack\u003c\/li\u003e\n\u003cli\u003eCV Reset jack to reset\/re-sync all jacks\u003c\/li\u003e\n\u003cli\u003eOptional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate\/Trigger, Up\/Down-counting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan class=\"large1\"\u003eJacks\u003c\/span\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eClock Input (5V to 15V clock, rising edge triggered), max 3kHz\u003c\/li\u003e\n\u003cli\u003eCV Rotate (0V to +5V input)\u003c\/li\u003e\n\u003cli\u003eCV Reset (5V to 15V trigger)\u003c\/li\u003e\n\u003cli\u003eDivided Clock Outputs (8 jacks):\n\u003cul\u003e\n\u003cli\u003eDivide-by-(1+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(2+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(3+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(4+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(5+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(6+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(7+R)\u003c\/li\u003e\n\u003cli\u003eDivide-by-(8+R)\u003c\/li\u003e\n\u003c\/ul\u003e\n...where R is the CV Rotation.\u003c\/li\u003e\n\u003cli\u003eSelectable Gate\/Trigger mode:\u003c\/li\u003e\n\u003cli\u003eSelectable Divide range up to Divide-by-64:\u003cbr\u003e Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.\u003c\/li\u003e\n\u003cli\u003eSelectable Auto-reset:\u003cbr\u003e Auto-reset will reset the divide counter every 16\/24\/32 clocks, which keeps the beats more \"dance-able\" even when using the \"weird\" clock divisions (3\/5\/6\/7\/9\/10\/11\/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The RCD is 4HP and 35mm (1.39\") deep\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5VSEL Jumper set to INT:\n\u003cul\u003e\n\u003cli\u003e33mA maximum power draw from +12V rail\u003c\/li\u003e\n\u003cli\u003e0mA max on the +5V rail\u003c\/li\u003e\n\u003cli\u003e4mA maximum power draw on the -12V rail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e5VSEL Jumper set to EXT:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e19mA maximum power draw on the +12V rail\u003c\/li\u003e\n\u003cli\u003e14mA max on the +5V rail\u003c\/li\u003e\n\u003cli\u003e4mA maximum power draw on the -12V rail \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -147px; top: -20px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307292463293,"sku":"1015551","price":246.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msrotatingclockdivider.jpg?v=1737829398"},{"product_id":"4ms-shuffling-clock-multiplier","title":"4MS SHUFFLING CLOCK MULTIPLIER","description":"\u003cp\u003eUnlike a clock divider, the Shuffling clock multiplier can output a multiplierd, accelerated clock! Three outputs carry a straigh clock, five outputs give you clock signal which can be influenced by the means of shuffling, pushing forward in time or skipping clocks. A CV at the rotate input can alter the multiplication factor of the eight outputs in realtime.\u003c\/p\u003e\n\u003cp\u003eThe Shuffling Clock Multiplier (SCM) produces eight multiplied clock tempos from a single input clock, ranging from x1 to x8 (x32 by using the Breakout). Some of the outputs can be shuffled\/swung. The amount of shuffle is controlled by a CV Slip jack. A Rotate CV jack re-assigns the multiplication number of each jack. More features of the SCM can be controlled by the \u003cstrong\u003eSCM Breakout\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv id=\"featurestab\" class=\"tab_content\"\u003e\n\u003cstrong\u003e\u003cspan class=\"large1\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eMultiply-by-1 to Multiply-by-32, on 8 output jacks\u003c\/li\u003e\n\u003cli\u003eFive Slipped\/Shuffled\/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively)\u003c\/li\u003e\n\u003cli\u003eThree steady clock outputs (x1, x2, and x8), which are not effected by Slip\/Shuffle\/Skip effects\u003c\/li\u003e\n\u003cli\u003eCV Rotate jack to shift multiply-by amount on all jacks\u003c\/li\u003e\n\u003cli\u003eCV Slip causes particular beats to land ahead in time\u003c\/li\u003e\n\u003cli\u003eConnects to the SCM Breakout for controlling more features: Pulse Width, Shuffle pattern, Skip, Re-sync, Mute, and 4x Fast\u003c\/li\u003e\n\u003cli\u003eISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code\u003c\/li\u003e\n\u003cli\u003eMaximum input frequency 3kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The SCM is 4HP and 35mm (1.39\") deep\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5VSEL Jumper set to INT:\n\u003cul\u003e\n\u003cli\u003e33mA maximum power draw from +12V rail\u003c\/li\u003e\n\u003cli\u003e0mA max on the +5V rail\u003c\/li\u003e\n\u003cli\u003e4mA maximum power draw on the -12V rail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e5VSEL Jumper set to EXT:\n\u003cul\u003e\n\u003cli\u003e19mA maximum power draw on the +12V rail\u003c\/li\u003e\n\u003cli\u003e14mA max on the +5V rail\u003c\/li\u003e\n\u003cli\u003e4mA maximum power draw on the -12V rail \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307292594365,"sku":"1015552","price":254.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msshufflingclockmultiplier.jpg?v=1625885433"},{"product_id":"4ms-pingable-envelope-generator","title":"4MS PINGABLE ENVELOPE GENERATOR","description":"\u003cp\u003eThe Pingable Envelope Generator or PEG is a dual digital envelope generator. The duration of one envelope cycle can be forced-to-fit between two \"pings\". This means that the envelope will perfectly fit into a rhythmical scheme!\u003c\/p\u003e\n\u003cp\u003eThe Pingable Envelope Generator (PEG) from 4ms is a dual envelope generator whose envelope lengths are set by incoming clocks or \"pings\".\u003c\/p\u003e\n\u003cp\u003eThe PEG has full CV control of envelope shape, skew, and ping (clock) division\/multiplication, as well as a plethora of triggering and cycling options (AD, AR, quantization, cycle), and a tap tempo button for each channel.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cb\u003eBasics:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual \"pingable\" envelope generator's total envelope time is set by a \"ping\"\u003c\/li\u003e\n\u003cli\u003eTap tempo button or incoming clock sets the ping time\u003c\/li\u003e\n\u003cli\u003eEnvelope time is a multiple or division of the ping time (from \/8 to x8) set by Ping Div\/Mult knob and CV\u003c\/li\u003e\n\u003cli\u003eCurve knob and CV control the shape of the output envelope. Various combinations of exponential, linear, logarithmic, and interpolated curves are available for the rise and fall portions. Total envelope time is maintained throughout any curve selection.\u003c\/li\u003e\n\u003cli\u003eSkew knob and CV control the ratio between rise and fall times without changing total envelope time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eScaling\/shifting:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eScale knob is an attenuating inverter for main envelope output (Maximum 0V to +10V non-inverted, and Minimum -10V to 0V inverted).\u003c\/li\u003e\n\u003cli\u003eBi-polar button centers main envelope output around 0V (-5V to +5V output)\u003c\/li\u003e\n\u003cli\u003e\"+5V ENV\" jack is a non-scaling output that always produces a 0V to +5V envelope, regardless of Scale and Bi-polar settings\u003c\/li\u003e\n\u003cli\u003e\"OR\" jack outputs an analog OR of the two scaled envelope curves. This outputs the highest value from either envelope at any given moment, taking into account the Scale and Bi-polar controls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eGate outputs:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnd-of-Rise (EOR) gate output goes high when envelope finishes a rise portion, and goes low when envelope begins a rise portion\u003c\/li\u003e\n\u003cli\u003eEnd-of-Fall (EOF) gate output goes high when envelope finishes a fall portion, and goes low when envelope begins a fall portion\u003c\/li\u003e\n\u003cli\u003eJumper for each channel changes EOR output to a Half-Rise gate output. The Half-Rise jack goes high when 50% of the time of the rise portion has elapsed, and goes low after 50% of the time of the fall portion. Using the Skew parameter, this jack provides a variable phase gate output useful for quadrature effects and clock phase shifting and trigger delay effects. Factory setting is EOR for red channel, Half-Rise for blue channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTriggering\/cycling:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCycle button for each channel forces envelope to self-cycle in sync with the ping clock (LFO mode). Button lights up when in cycle mode.\u003c\/li\u003e\n\u003cli\u003e\"T\" jack toggles the state of both channels' Cycle button when a gate is applied\u003c\/li\u003e\n\u003cli\u003e\"QNT\" jack for each channel triggers an envelope to start at the next quantized beat, with respect to the divided\/multiplied ping clock. Holding a gate high on this jack causes the envelope to repeat.\u003c\/li\u003e\n\u003cli\u003e\"Async\" jack for each channel causes an envelope to output immediately (asynchronously). Holding a gate high results in an AR envelope (rise-sustain-fall). If cycle mode is enabled, the envelope will continue to cycle at this new phase with respect to the ping clock. Phase can be reset to being in sync with the ping clock by pressing the cycle button or applying a pulse to the QNT jack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eCV input jacks:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCV control of Ping Div\/Mult, Skew, and Curve using the CV jacks. Respective knobs set the center offset for the applied CV\u003c\/li\u003e\n\u003cli\u003eCV of 0-10V will modulate the parameter's full range However, a 0-5V CV will modulate the parameter within a very useful range. \u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The PEG is 20HP and 1.0 inches (26mm) deep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e A jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail:\n\u003cul\u003e\n\u003cli\u003e60mA max with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003e105mA max with jumper selecting internal 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e+5V rail:\n\u003cul\u003e\n\u003cli\u003e40mA max with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e-12V rail:\n\u003cul\u003e\n\u003cli\u003e35mA max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307292692669,"sku":"1015554","price":478.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4mspingableenvelopegenerator.jpg?v=1625885435"},{"product_id":"4ms-peg-kit-silver","title":"4MS PEG Kit Silver","description":"\u003cp\u003eThe Pingable Envelope Generator or PEG is a dual digital envelope generator. The duration of one envelope cycle can be forced-to-fit between two \"pings\". This means that the envelope will perfectly fit into a rhythmical scheme!\u003c\/p\u003e\n\u003cp\u003eThe Pingable Envelope Generator (PEG) from 4ms is a dual envelope generator whose envelope lengths are set by incoming clocks or \"pings\".\u003c\/p\u003e\n\u003cp\u003eThe PEG has full CV control of envelope shape, skew, and ping (clock) division\/multiplication, as well as a plethora of triggering and cycling options (AD, AR, quantization, cycle), and a tap tempo button for each channel.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cb\u003eBasics:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual \"pingable\" envelope generator's total envelope time is set by a \"ping\"\u003c\/li\u003e\n\u003cli\u003eTap tempo button or incoming clock sets the ping time\u003c\/li\u003e\n\u003cli\u003eEnvelope time is a multiple or division of the ping time (from \/8 to x8) set by Ping Div\/Mult knob and CV\u003c\/li\u003e\n\u003cli\u003eCurve knob and CV control the shape of the output envelope. Various combinations of exponential, linear, logarithmic, and interpolated curves are available for the rise and fall portions. Total envelope time is maintained throughout any curve selection.\u003c\/li\u003e\n\u003cli\u003eSkew knob and CV control the ratio between rise and fall times without changing total envelope time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eScaling\/shifting:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eScale knob is an attenuating inverter for main envelope output (Maximum 0V to +10V non-inverted, and Minimum -10V to 0V inverted).\u003c\/li\u003e\n\u003cli\u003eBi-polar button centers main envelope output around 0V (-5V to +5V output)\u003c\/li\u003e\n\u003cli\u003e\"+5V ENV\" jack is a non-scaling output that always produces a 0V to +5V envelope, regardless of Scale and Bi-polar settings\u003c\/li\u003e\n\u003cli\u003e\"OR\" jack outputs an analog OR of the two scaled envelope curves. This outputs the highest value from either envelope at any given moment, taking into account the Scale and Bi-polar controls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eGate outputs:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnd-of-Rise (EOR) gate output goes high when envelope finishes a rise portion, and goes low when envelope begins a rise portion\u003c\/li\u003e\n\u003cli\u003eEnd-of-Fall (EOF) gate output goes high when envelope finishes a fall portion, and goes low when envelope begins a fall portion\u003c\/li\u003e\n\u003cli\u003eJumper for each channel changes EOR output to a Half-Rise gate output. The Half-Rise jack goes high when 50% of the time of the rise portion has elapsed, and goes low after 50% of the time of the fall portion. Using the Skew parameter, this jack provides a variable phase gate output useful for quadrature effects and clock phase shifting and trigger delay effects. Factory setting is EOR for red channel, Half-Rise for blue channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTriggering\/cycling:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCycle button for each channel forces envelope to self-cycle in sync with the ping clock (LFO mode). Button lights up when in cycle mode.\u003c\/li\u003e\n\u003cli\u003e\"T\" jack toggles the state of both channels' Cycle button when a gate is applied\u003c\/li\u003e\n\u003cli\u003e\"QNT\" jack for each channel triggers an envelope to start at the next quantized beat, with respect to the divided\/multiplied ping clock. Holding a gate high on this jack causes the envelope to repeat.\u003c\/li\u003e\n\u003cli\u003e\"Async\" jack for each channel causes an envelope to output immediately (asynchronously). Holding a gate high results in an AR envelope (rise-sustain-fall). If cycle mode is enabled, the envelope will continue to cycle at this new phase with respect to the ping clock. Phase can be reset to being in sync with the ping clock by pressing the cycle button or applying a pulse to the QNT jack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eCV input jacks:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCV control of Ping Div\/Mult, Skew, and Curve using the CV jacks. Respective knobs set the center offset for the applied CV\u003c\/li\u003e\n\u003cli\u003eCV of 0-10V will modulate the parameter's full range However, a 0-5V CV will modulate the parameter within a very useful range. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The PEG is 20HP and 1.0 inches (26mm) deep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e A jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail:\n\u003cul\u003e\n\u003cli\u003e60mA max with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003e105mA max with jumper selecting internal 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e+5V rail:\n\u003cul\u003e\n\u003cli\u003e40mA max with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e-12V rail:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e35mA max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"position: absolute; left: -129px; top: -20px;\" id=\"gtx-trans\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307292954813,"sku":"1015556","price":276.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-pingable-envelope-generator.jpg?v=1628074279"},{"product_id":"4ms-quad-clock-distributor","title":"4MS Quad Clock Distributor","description":"\u003cp\u003eFour voltage controlled clock dividers\/multipliers. The clock can be external or it can be tapped with the TapTempo button what makes the module great as a master clock generator. Complex rhythmic patterns are easily achieved by patching multiple channels into each other's Div\/Mult CV and Reset sockets.\u003c\/p\u003e\n\u003cp\u003eFour channel voltage controlled Clock Divider\/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.\u003cbr\u003eWith a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain \"Master\" clock module, and\/or a complex rhythmic pattern generator.\u003c\/p\u003e\n\u003cdiv id=\"product_info_content_container\"\u003e\n\u003cdiv id=\"featurestab\" class=\"tab_content\"\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eBasic features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour CV-controlled Clock Divider\/Multipliers\u003c\/li\u003e\n\u003cli\u003eTap tempo button and five sync'ed clock outputs make the QCD perfect for head-of-the-chain \"Master\" clock module\u003c\/li\u003e\n\u003cli\u003eTap clock output runs at the tapped tempo (even if other channels are being clocked externally)\u003c\/li\u003e\n\u003cli\u003eCreate complex rhythmic patterns by patching multiple channels into each other's Div\/Mult CV and Reset\u003c\/li\u003e\n\u003cli\u003eEach of the four channels has an independent clock IN, OUT, Reset and Div\/Mult CV\u003c\/li\u003e\n\u003cli\u003eDivide or Multiply incoming clock from \/32 to x16 on each channel:\n\u003cul\u003e\n\u003cli\u003eDetented knob to snap to integer division\/multiples\u003c\/li\u003e\n\u003cli\u003eCV jack to modulate Div\/Mult amount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eReset jack (per channel) restarts the clock when a trigger is received (alters phase of clock)\u003c\/li\u003e\n\u003cli\u003eClock input jacks are normalized downwards: Tap-\u0026gt;Red-\u0026gt;Black-\u0026gt;Blue-\u0026gt;Green\u003c\/li\u003e\n\u003cli\u003eClock outputs stop automatically when incoming clock stops\u003c\/li\u003e\n\u003cli\u003eLEDs blink to output clocks' tempos\u003c\/li\u003e\n\u003cli\u003e5V clock output pulses, fully buffered. Default is square-wave, and PW is controllable with expander\u003c\/li\u003e\n\u003cli\u003eDaisy chain multiple QCDs or other clock modules using Tap Out jack\u003c\/li\u003e\n\u003cli\u003eHeader on the PCB to connect to Quad Pingable LFO (QPLFO) to provide four CV Skew-able, CV Div\/Mult-able envelopes\u003c\/li\u003e\n\u003cli\u003eInterfaces with QCD Expander for more features (Pulse Width, Inverted Gate, attenuverters for CV inputs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"product_info_content_container\"\u003e\n\u003cdiv id=\"specstab\" class=\"tab_content\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The QCD is 10HP and 1.0 inches (26mm) deep. \u003cbr\u003e All pots have a metal shaft and nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e A jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail:\n\u003cul\u003e\n\u003cli\u003e48mA with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003e88mA with jumper selecting internal 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e+5V rail:\n\u003cul\u003e\n\u003cli\u003e41mA with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e-12V rail:\n\u003cul\u003e\n\u003cli\u003e40mA \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307293315261,"sku":"1015557","price":334.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-qcd-quad-clock-distributor.jpg?v=1628074345"},{"product_id":"4ms-buffered-mult","title":"4MS Buffered Mult","description":"\u003cp\u003eThe Buff Mult is a buffered multiple with LED indicators to show positive and negative voltages. Using wide bandwidth opamps, it functions as a dual 1-to-3 or a single 1-to-6 mult for audio, video, or CV signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo independant buffered multiples, normaled together\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEach channel has one input and three outputs that are high-grade copies of the original\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEach channel has a bi-color LED to indicate positive (white) or negative (red) signal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVideo-rate opamps, for greatest bandwidth of any buffered mult. Fully compatible with LZX and video signals\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBottom channel is normalized to top channel, for a 1-to-6 multiple\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUseful for detecting signals, troubleshooting patches, isolating modules, preventing \"thump\" or glitches during live patching, and protecting outputs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModule size:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 4ms Buffered Mult is 3HP and 0.75 inches (18mm) deep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e+12V rail: 13mA\u003cbr\u003e-12V rail: 13mA\u003cbr\u003e+5V rail: Not used (0mA)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -88px; top: -20px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default","offer_id":41414062211261,"sku":"1015558","price":109.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-buffmult-buffered-mult.jpg?v=1628074169"},{"product_id":"4ms-qcd-expander","title":"4MS QCD Expander","description":"\u003cp\u003eThe QCD Expander adds lots of functionality to the Quad Clock distributor like an attenuator, an inverted output with three different operation modes and a pulse width\/delay control. With the expander the QCD will generate non-linear sequences, self-evlovong rhythms, swing\/shuffle patterns, humanizing and randomness\u003c\/p\u003e\n\u003cp\u003eThe QCD Expander is an expansion module for the Quad Clock Distributor (QCD). The QCD Expander adds a host of features, turning the QCD into a programmatic non-linear sequencer. Each channel gets a CV Trigger Delay (Pulse Width) jack and knob, an additional output jack with three selectable modes, and attenuverters for all CV input jacks. Self-patched evolving rhythms and swing\/shuffle patterns are easily obtained, as well as complete control over standard rhythmic patterns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eBasic features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnects to QCD module with a 16-conductor ribbon cable (included)\u003c\/li\u003e\n\u003cli\u003eMore features are added to each QCD channel:\n\u003cul\u003e\n\u003cli\u003eMulti-mode output jack INV OUT mirrors the tempo of main QCD output\u003c\/li\u003e\n\u003cli\u003eMode Switch for each INV OUT jack:\n\u003cul\u003e\n\u003cli\u003eDelayed Trigger Mode\u003c\/li\u003e\n\u003cli\u003eInverted Gate Mode\u003c\/li\u003e\n\u003cli\u003eShuffle Mode (delayed + original trigger)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePW\/Delay knob controls trigger delay time on INV OUT jack (or pulse width in Inverted Gate Mode)\n\u003cul\u003e\n\u003cli\u003eAlso controls Pulse Width of main QCD OUT jack\u003c\/li\u003e\n\u003cli\u003eCV input jack for external control\u003c\/li\u003e\n\u003cli\u003eAttenuverter allows for one channel to precisely modulate another channel's delay or pulse width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiv\/Mult CV attenuator knob\n\u003cul\u003e\n\u003cli\u003eControls how much the signal on the main QCD's Div\/Mult CV jack will modulate the tempo\u003c\/li\u003e\n\u003cli\u003eUseful for precisely modulating the speed of one channel with another\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eGlobal LED brightness can be adjusted from the front panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The QCD Expander is 12HP and 0.98\" (25mm) deep. \u003cbr\u003e Four knobbed pots have a metal shaft and nut. Eight knobless pots are center-detent with white indicator line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail: 44mA max\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003e-12V rail: 30mA max\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":41905203970237,"sku":"1015559","price":278.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msqcdexpander.jpg?v=1625885440"},{"product_id":"4ms-power-brick-90w-usa-cord","title":"4MS Power Brick 90W (USA Cord)","description":"\u003cp\u003e90W strong external power supply for powering the RowPower by 4ms. The power supply can operate several RowPower units.4ms Power Brick 90w is for use with the ROW Power 30 and ROW Power 40. It is a laptop style PSU for powering the Power 30\/40\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e90W, that is sufficient for operating several RowPower units. For instance three RowPower 30 or two RowPower 40... anyhow, enough power for three to five rows of modules!\u003c\/p\u003e\n\u003cp\u003eprimary voltage 100-240V , 50\/60Hz\u003cbr\u003esecondary voltage: 19V DC\u003cbr\u003econnectors\u003c\/p\u003e\n\u003cp\u003e\"Cloverleaf\" mains input aka. \"mickey mouse\" socket. 2.1mm output socket (center positive) on a 90cm long cable.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWeight\u003cbr\u003e0.2 kg\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -262px; top: -20px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":41905204101309,"sku":"1015561","price":36.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-power-brick-90w.jpg?v=1628074300"},{"product_id":"4ms-scm-kit-silver","title":"4MS SCM Kit Silver","description":"\u003cp\u003eDIYers can build a 4ms Shuffling Clock Multiplier with this kit. All electronic components as well as the blank PCB and a faceplate are included. Although the english manual explains the buildup process quite good you should bring some knowledge in electrotechnics and soldering skills.\u003c\/p\u003e\n\u003cp\u003eBuild your own Shuffling Clock Multiplier, with the SCM kit.\u003c\/p\u003e\n\u003cp\u003eThe Do-it-yourself kit includes all the parts necessary to build a fully-featured SCM. This is a beginner-level kit, but you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMultiply-by-1 to Multiply-by-32, on 8 output jacks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFive Slipped\/Shuffled\/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThree steady clock outputs (x1, x2, and x8), which are not effected by Slip\/Shuffle\/Skip effects\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV Rotate jack to shift multiply-by amount on all jacks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV Slip causes particular beats to land ahead in time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnects to the SCM Breakout for controlling more features: Pulse Width, Shuffle pattern, Skip, Re-sync, Mute, and 4x Fast\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum input frequency 3kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e \u003c\/strong\u003e\u003cbr\u003e The SCM is 4HP and 48mm (1.85\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail: __mA\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003e-12V rail: not used\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307293806781,"sku":"1015563","price":134.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-scm-kit.jpg?v=1628074395"},{"product_id":"4ms-sism-shifting-inverting-signal-mingler","title":"4MS SISM Shifting Inverting Signal Mingler","description":"\u003cp\u003eSuper practical four-channel voltage manipulator for scaling, attenuating, inverting and mixing signals. Offset can be generated by the SISM as well and the slice function extracts the sums of all positive or negative voltages. Plenty of LEDs show what's going on with your signal.\u003c\/p\u003e\n\u003cp\u003eThe SISM is a 4-channel voltage manipulator that can scale, invert, attenuate, shift (dc offset), mix, split, and slice your CV and audio signals.\u003c\/p\u003e\n\u003cp\u003eA plethora of red and blue LEDs (14) show exactly what each channel and output jack is doing: red = negative voltage, blue = positive.\u003c\/p\u003e\n\u003cp\u003eEach channel is independent and has an input jack, output jack, a knob for attenuating\/inverting (Scale), and a knob for applying positive or negative DC offset (Shift).\u003c\/p\u003e\n\u003cp\u003eFour jacks on the bottom combine the four channels in different ways. Mix is a straight mix of all four shifted inputs, Switched Mix is a mix of all channels that have nothing plugged into the OUT jack, Positive Slice is the sum of all output voltages greater than zero volts, and Negative Slice is the sum of all negative voltages.\u003c\/p\u003e\n\u003cp\u003eBy Shifting some channels positive and some negative, the + Slice and - Slice jacks can be used as sub-mix outputs. Also, by running a slow triangle wave into one channel, the remaining channels can be made to \"dirty pan\" between the Slice jacks: the signals are half-wave rectified as they span between both outputs.\u003c\/p\u003e\n\u003cp\u003eChannels 1+2 and 3+4 are normalized together on the input jacks, which is handy for splitting a signal into two or more altered forms. Jumpers on the back allow you to disable this normalization.\u003c\/p\u003e\n\u003cp\u003eEach channel also has a jumper to make the Scale knob unipolar (no inverting, attenuate only). This is useful for mixing audio instead of CV. A breakout header allows for padding of the signal (useful for fine-tuning a precise voltage such as 1V\/oct).\u003c\/p\u003e\n\u003cp\u003eInput and Output headers for connecting to QCD, QPLFO, VCA Matrix, or other manufacturer's modules such as Toppobrillo Mixiplexer or Circuit Abbey Intermix.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eBasic features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour independent voltage processor channels, with four mix\/mingle outputs\u003c\/li\u003e\n\u003cli\u003eEach channel has:\n\u003cul\u003e\n\u003cli\u003eInput jack\u003c\/li\u003e\n\u003cli\u003eScale knob (from inverted unity, to zero, to unity\u003c\/li\u003e\n\u003cli\u003eShift knob (adds\/subtracts DC offset from -9V to +9V)\u003c\/li\u003e\n\u003cli\u003eOutput jack\u003c\/li\u003e\n\u003cli\u003eRed and blue LEDs to indicate + or - voltage, as well as intensity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMIX jack outputs sum of all channels\u003c\/li\u003e\n\u003cli\u003eMIX SWitch jack outputs sum of all channels \u003ci\u003ewith nothing plugged into their output jack\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e+ SLICE jack outputs positive portion of mix (voltages greater than 0V)\u003c\/li\u003e\n\u003cli\u003e- SLICE jack outputs negative portion of mix (voltages less than 0V)\u003c\/li\u003e\n\u003cli\u003eRed and blue LEDs on all four mix\/mingle jacks display what the signal is doing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eAdvanced features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChannels 1+2 and 3+4 are normaled together on the input, so plugging into Channel 1 (or 3) will split the signal: A jumper can disable this normalization\u003c\/li\u003e\n\u003cli\u003eScale knob has three ranges that are selectable with jumpers:\n\u003cul\u003e\n\u003cli\u003eBi-polar: -1x to +1x (inverting unity to unity) --\u003ci\u003edefault\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003eUni-polar: 0 to +1x (level fader)\u003c\/li\u003e\n\u003cli\u003eBoost: 0 to 2x (twice the voltage gain)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Header (2x4) for connecting the output of a QCD or QPLFO to the SISM's inputs. Plugging into the input jacks overrides the signal on the header\u003c\/li\u003e\n\u003cli\u003eOutput Header (2x4) for connecting to the input of a VCA Matrix or other compatible module\u003c\/li\u003e\n\u003cli\u003ePAD breakout header (2x4) for connecting to a breakout module that applies a pre-set pad (attenuation) to each channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003eModule size:\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e The SISM is 12HP and 0.86 inches (22mm) deep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"large1\"\u003ePower consumption:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V rail: 51mA max\u003c\/li\u003e\n\u003cli\u003e-12V rail: 51mA max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307294036157,"sku":"1015565","price":269.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4mssismshiftinginvertingsignalmingler.jpg?v=1625885450"},{"product_id":"4ms-qplfo-kit-silver","title":"4MS QPLFO Kit Silver","description":"\u003cp\u003eThe Quad Pingable LFO is a compact, playable four-channel tap-tempo, clock-syncable LFO with variable skew and reset.\u003c\/p\u003e\n\u003cp\u003eThe QPLFO is designed to be useful in small portable systems that require maximum functionality in minimal space, as well as large systems that need maximum modulation sources.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBuild your own Quad Pingable LFO\u003c\/p\u003e\n\u003cp\u003eThe Do-it-yourself kit includes all the parts necessary to build a fully-featured QPLFO. This is an advanced-level kit, so you should be experienced in soldering and have basic hand tools (flush snips, needle-nose pliers, small screw driver).  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42307294167229,"sku":"1015566","price":262.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4ms-qplfo-kit.jpg?v=1628074317"},{"product_id":"4ms-bus-stick-bare-headers","title":"4MS BUS STICK (BARE HEADERS)","description":"\u003cp\u003eBus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using un-shrouded headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":41905204887741,"sku":"1015567","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msbusstickbareheaders.jpg?v=1622824292"},{"product_id":"4ms-bus-stick-shrouded-headers","title":"4MS Bus Stick (Shrouded Headers)","description":"\u003cp\u003eThe 4ms bus stick is for use with Eurorack modular systems. The Bus Stick is a flexible solution for custom cases or cases that do not provide power. They are attached to the case via double sided adhesive. They are compatible with the 4ms ROW Power 30\/40 system and are available with keyed (shrouded) or bare\/male pin (un-shrouded) headers.\u003c\/p\u003e\n\u003cp\u003eBus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"4MS Company","offers":[{"title":"Default Title","offer_id":42196299153597,"sku":"1015568","price":56.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/4msbusstickshroudedheaders.jpg?v=1622824294"},{"product_id":"alm-beasts-chalkboard","title":"ALM Beast's Chalkboard","description":"\u003cp\u003e\u003cspan\u003e‘Beast’s Chalkboard’ is dual channel stepped voltage source and adder for your eurorack modular synthesizer system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt primarily is intended as a dual octave switcher for VCO’s but has many other uses including sequence transposition, FM ratio creation, buffered CV distribution and VCO calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -133px; top: -20.0139px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ALM - Busy Circuits","offers":[{"title":"Default Title","offer_id":42307294527677,"sku":"1015759","price":183.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/almbeastschalkboard.png?v=1625885458"},{"product_id":"alm-s-b-g","title":"ALM S.B.G.","description":"\u003cp\u003e\u003cspan\u003eThe ‘S.B.G’ is a compact utility module intended for the interfacing of guitar effect pedals with your eurorack modular system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt provides both attenuation and amplification of audio signals for level matching together with a crossfade control to conveniently adjust the wet\/dry mix of a processed signal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe module also offers regulation of outgoing CV signals for safer use of pedal expression inputs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -173px; top: -20.0139px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ALM - Busy Circuits","offers":[{"title":"Default Title","offer_id":41472064913597,"sku":"1015761","price":157.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/almsbg.png?v=1622824301"},{"product_id":"alm-tangle-quartet","title":"ALM Tangle Quartet","description":"\u003cp\u003e\u003cspan\u003e‘Tangle Quartet’ is a high quality quad linear voltage controlled amplifier (VCA) providing individual level control of 4 signal inputs with both individual outputs and a combined ‘mix’ output (for non patched outputs).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eControl signal inputs and associated attenuation controls allow for voltage control of signal levels. Control inputs are normalised to 5v thus providing manual mix control in the absence of control signals.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -166px; top: -20.0139px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ALM - Busy Circuits","offers":[{"title":"Default Title","offer_id":42166111994045,"sku":"1015762","price":275.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/almtanglequartet.png?v=1622824303"},{"product_id":"alm-o-a-x2","title":"ALM O\/A\/X2","description":"\u003cp\u003e\u003cspan\u003e‘O\/A\/x2’ is a dual channel attenuverter with each channel also including a bipolar voltage offset and LED monitoring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe module is primarily intended for fine grain flexible ‘editing’ of control signals (i.e changing the phase, level and DC offset of an LFO signal) but also has uses with audio signals such as attenuation, inversion and mixing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: -208px; top: -20.0139px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ALM - Busy Circuits","offers":[{"title":"Default Title","offer_id":41472064946365,"sku":"1015763","price":131.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/almoax2.png?v=1622824305"},{"product_id":"doepfer-mcv4-v1-10-black-w-power-supply","title":"Doepfer MCV4 V1.10 Black","description":"\u003cp\u003eMCV4 is a budget-priced MIDI-to-CV-Interface to control vintage monophonic synthesizers via MIDI. MCV4 is provided with 4 analog control voltage outputs (CV1...4) and one Gate\/Trigger output.\u003cbr\u003e\u003cbr\u003eThese are the most important MCV4 features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCV1 note on\/off und Pitch-Bend, 1V\/Oktave\u003c\/li\u003e\n\u003cli\u003eCV2 monophoner Aftertouch\u003c\/li\u003e\n\u003cli\u003eCV3 Velocity und\/oder Volumen (Controller #7)\u003c\/li\u003e\n\u003cli\u003eCV4 Velocity und\/oder beliebiger Controller (Einstellung der Controller-Nummer über Lern-Funktion)\u003c\/li\u003e\n\u003cli\u003eMIDI control of CV1..4:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCV1: note on\/off with pitch-bend, 1V\/octave characteristic\u003c\/li\u003e\n\u003cli\u003eCV2 monophic after-touch\u003c\/li\u003e\n\u003cli\u003eCV3 velocity and\/or volumen (controller #7)\u003c\/li\u003e\n\u003cli\u003eCV4 velocity and\/or any controller (setting of the controller number via learn button)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003epitch-bend is used for CV1 generation with 1\/4 semitone resolution\u003c\/li\u003e\n\u003cli\u003egate output type can be selected via jumper inside the device between voltage trigger (+5V or power supply voltage) and S-trigger (switched trigger)\u003c\/li\u003e\n\u003cli\u003eMIDI channel and reference note for CV1=0V adjustable via learn button\u003c\/li\u003e\n\u003cli\u003edifferent assign modes for CV1 (highest note, last note, reference note)\u003c\/li\u003e\n\u003cli\u003eretrigger on\/off while playing legato\u003c\/li\u003e\n\u003cli\u003egate\/trigger polarity normal\/inverted\u003c\/li\u003e\n\u003cli\u003etwo 1\/4\" stereo jack sockets for CV1\/2 and CV3\/4\u003c\/li\u003e\n\u003cli\u003e1\/4\" mono jack socket for gate\/triggerlearn button with LED for adjusting MIDI channel, reference note for CV1, controller for CV4\u003c\/li\u003e\n\u003cli\u003eoptical display of gate\/trigger via LED\u003c\/li\u003e\n\u003cli\u003eMIDI-In, MIDI-Thru\u003c\/li\u003e\n\u003cli\u003enon-volatile memory for parameter settings\u003c\/li\u003e\n\u003cli\u003estable metal case (about 95x75x35 mm, 1mm sheet steel)\u003c\/li\u003e\n\u003cli\u003eUntil spring 2011 the case color was silver-grey.\u003c\/li\u003e\n\u003cli\u003eFrom spring 2011 the case color is black.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052005888189,"sku":"1015975","price":194.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-mcv4-v1-black-power-supply.png?v=1628641168"},{"product_id":"doepfer-msy2-v1-0-black-no-power-supply","title":"Doepfer MSY2 V1.0 Black \/ NO Power Supply","description":"\u003cp\u003eMSY2 is an interface that converts the MIDI realtime events CLOCK, START and STOP into the corresponding signals CLOCK and START \/STOP of the SYNC standard. It is equipped with 2 SYNC DIN sockets (switched in parallel), a Clock miniature jack socket (3.5mm), MIDI-in and MIDI-Thru. The SYNC standard is used in vintage drum computers or sequencers such as the Roland TR808 rhythm composer or the TB303 bass line. SYNC-CLOCK is a periodic signal (0\/+5V) representing the tempo. SYNC-START\/STOP is a signal that indicates one of the 2 possible states: START = +5V, STOP = 0V. The Clock pin of the SYNC standard is additionally available from a miniature jack socket e.g. for synchronizing the arpeggio input of an analog synthesizer with MIDI.\u003c\/p\u003e\n\u003cp\u003eMSY2 enables the 1:1 conversion of MIDI CLOCK to SYNC CLOCK (i.e. 1 MIDI clock triggers 1 SYNC clock pulse), as well as the reduction of the tempo by dividing the incoming MIDI clock frequency by an integer factor. The factor can be set to any value between 1 and 16 with a DIP switch at the bottom of the MSY2. A factor 1 corresponds to the 1:1 conversion, 16 is the maximum of frequency reduction, i.e. after 16 MIDI clocks 1 SYNC clock appears. With two other switches the Start\/Stop polarity and the Clock polarity can be changed for special applications not following the SYNC standard.\u003c\/p\u003e\n\u003cp\u003eClock and Start\/Stop are displayed with 2 LEDs. For the power supply of the MSY2 there are possible solutions: external power supply or supply via MIDI In. The external power supply version will work in any case (7...12V\/100mA required). The power supply via MIDI will work only if the MIDI controlling device is in full agreement with the MIDI hardware standard. Inside the MSY2 case is a jumper to select the type of power supply. The factory setting is for external power supply. You have to try out with your MIDI device whether the power supply via MIDI in will work.\u003c\/p\u003e\n\u003cp\u003eMSY2 is built into a small orange-red metal case (about 60 x 60x 35 mm).\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052005953725,"sku":"1015976","price":153.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-msy2-v1-black-no-power-supply.png?v=1628641185"},{"product_id":"doepfer-darklink-usb-black-w-power-supply","title":"Doepfer DarkLINK USB Black w\/ Power Supply","description":"\u003cdiv id=\"cnp\"\u003eDoepfer Dark Link, USB\/Midi-to-CV\/Gate Interface to control vintage monophonic synthesizers via Midi or USB, 4 analog control voltage outputs (CV1...4) and one Gate output, USB-Connection, MIDI-Input, Learn button. for devices with +5V and +12V Gate-Voltage.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUSB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMidi Input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLearn button\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGate Out (with LED for Gate display and learn function)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV1: controlled by Midi note messages, 1V\/Octave, 0...+5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV2: controlled by Midi pitch bend, ~ -2.5...+2.5V or ~ 0...+5V (can be selected by an internal jumper)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV3: controlled by Midi velocity, 0...+5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV4: controlled by Midi control change messages, free assignale controller in learn mode\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGlide control (portamento function for CV1)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e power supply (12V \u003cspan style=\"text-decoration: underline;\"\u003eAC\u003c\/span\u003e\/min. 400mA)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV1...CV4 and Gate are 3.5 mm miniature jack sockets\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"padding-left: 30px;\"\u003e\u003cspan\u003eOther Features:\u003cbr\u003e\u003cbr\u003e• MIDI channel, reference note for CV1 (this is the MIDI note corresponding to 0V of CV1 and thus the lowest possible note of the analog synthesizer connected to Dark Link) and the controller no. for CV4 are adjusted via learn function. For this the learn button must be pressed and the required MIDI messages sent from the MIDI controlling device (MIDI synthesizer, keyboard, sequencer ...).\u003cbr\u003e• The other parameters (retrigger, trigger polarity, assign mode ...) are also adjusted in learn mode via program-change messages.\u003cbr\u003e• Dark Link is nothing but the interface of Dark Energy\u003cbr\u003e• Metal case, made of 1 mm steel, black coated with white printing\u003cbr\u003e• Dimensions: about 145 length x 35 height x 60 depth (all measures are in mm)\u003cbr\u003e• Weight: about ?? kg\u003cbr\u003e• These parts are included (worldwide): one USB cable (type A-B), user's guide\u003cbr\u003e• These parts are included (only within Europe): power supply (12 AC\/min. 400mA) for 230V mains voltage with European mains plug, please ask the Doepfer representative in your country if a power supply is included if you from other countries\u003cbr\u003e• Please order suitable patch cables in addition if required (Midi, A-100 patch cable in the required length, adapter cable 3.5 mm - 6.3 mm \/1\/4\" jack plug)\u003cbr\u003e• Powering the device via USB is not possible, because the analog circuits require a dual voltage (+\/-12V).\u003cbr\u003e• If you want to connect the Dark Link gate output to devices that use S-Trig a special S-Trig cable is available (only necessary for units manufactured before 2012). For details please refer to our FAQ page.\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052006019261,"sku":"1015977","price":234.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-dark-link-usb-black-power-supply.png?v=1628641154"},{"product_id":"doepfer-a-100g6-basic-frame-6he-a-100psu2-incl","title":"Doepfer A-100G6 Basic Frame 6HE \/ A-100PSU2 INCL.","description":"\u003cp\u003e\u003cspan\u003ebasic frames 6u \/ 84hp\u003cbr\u003e\u003cbr\u003e specifications for frames: empty 19\" rackmount cases (subracks), width about 482 mm, depth about 240mm, including  bus board(s), power supply +\/-12 v\/ 1200 ma (known as the psu2), mains inlet, fuse and power switch, rear, top and bottom covers, incl. all mechanical parts, completely assembled and tested, for plug-in of the desired modules.\u003cbr\u003e\u003cbr\u003e 6u: 2 x 3 u (about 264 mm), 2 x 84 hp effective width (about 2 x 426.7 mm), 2 bus boards, 1 back panel 3u (blind), 1 back panel 3u with power supply, used for a-100 basic system 1 and 2\u003cbr\u003e\u003cbr\u003e power supply : 115v\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052006609085,"sku":"1015982","price":1158.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera100g6basicframe6hea100psu2incl.png?v=1625885495"},{"product_id":"doepfer-a-100p6-portable-case","title":"Doepfer A-100P6 Portable Case","description":"\u003cp\u003eThe A-100 basic frame with 6HU is available even as a portable 6 HU suitcase version without additional charges. The portable 6 HU suitcase version has the same usable space available as the normal basic frame (i.e. 2 x 84 HP)\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052006674621,"sku":"1015983","price":1077.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera100p6portablecase.png?v=1625885497"},{"product_id":"doepfer-a-100p9-portable-case","title":"Doepfer A-100P9 Portable Case","description":"\u003cp\u003eThis an enlarged version of the A-100 suitcase with 9 U or three rows of modules. As only one power supply is required this is the most economic version of the A-100 suitcase. Apart from that the 9U version is identical to the 6U version.\u003c\/p\u003e\n\u003ch3\u003eMeasures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eoutside: approx. 465 (width) x 475 (height) x 170 (depth) mm, without cover and without rubber feet\u003c\/li\u003e\n\u003cli\u003eoutside: approx. 465 (width) x 485 (height) x 235 (depth) mm, with cover and with rubber feet\u003c\/li\u003e\n\u003cli\u003einside: 3 x 84 HP x 3 U, usable depth for A-100 modules: approx. 70 mm in the power supply area (bottom right), resp. approx. 100 mm in the remaining area (measured from inner side of the front panel until end of the pc board of the module)\u003c\/li\u003e\n\u003cli\u003eWeight (without modules): about 8,3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003emains voltage: 115V~ or 230V~ (please specify when you order)\u003c\/li\u003e\n\u003cli\u003eoutput voltages\/current: +12V\/1200mA, -12V\/1200mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052006740157,"sku":"1015984","price":1206.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera100p9portablecase.png?v=1625885499"},{"product_id":"doepfer-a-100pms12-single-version-monster-case-168hp-12u","title":"Doepfer A-100PMS12 Single Version Monster Case 168HP\/12U","description":"\u003cp\u003eAs a special design the suitcase version of the A-100 frame is available even in a \"monster\" version with double width and height (168HP \/ 12HU). It can be chosen between a single and double version of the monster suitcase and even the monster cases are available in black or grey. For the double version the two suitcases are fixed together face-to-face during transportation so that no covers are required (as for the single version). Each monster suitcase is equipped with four power supplies with toroid transfomer\/1200mA\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eoutside dimensions (with front cover, closed state): ~ 90 (length) x 62 (height) x 23 (depth) cm\u003c\/li\u003e\n\u003cli\u003eweight of the single case (incl. bus boards, power supplies, with front cover, without modules): ~ 20 kg\u003c\/li\u003e\n\u003cli\u003eoutside dimensions of the single case (without front cover): ~ 90 (length) x 62 (height) x 18 (depth) cm\u003c\/li\u003e\n\u003cli\u003eweight of the single case (incl. bus boards, power supplies, without front cover, without modules): ~ 16 kg\u003c\/li\u003e\n\u003cli\u003eweight of the front cover: ~ 4 kg\u003c\/li\u003e\n\u003cli\u003eavailable 19\" width and height: 12 U x 168 HP\u003c\/li\u003e\n\u003cli\u003emax. module current: 4.8A (four power supplies 1.2A each, one power supply is assigned to two bus boards)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052006805693,"sku":"1015985","price":3353.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100pms12-single-version-monster-case.png?v=1628640509"},{"product_id":"doepfer-a-100pb-monster-base-84hp-6u","title":"Doepfer A-100PB Monster Base 84HP\/6U","description":"\u003cp\u003eThis is the \"small brother\" of the monster base A-100PMB. It is very similar to the A-100PMB but has only half the width (2 x 84 HP for installation of modules). The suitcase versions A-100P6 or A-100P9 can be positioned on top of the A-100PB because the width of the A-100PB is a bit more than the width of A-100P6\/P9 and the footprint of the A-100PB is adapted to the depth of A-100P6\/P9. A-100PB is equipped with one power supply (1200mA) and two bus boards. The bus boards are located in the rear area (even those for the modules that are mounted in the front row). This was necessary to take advantage of the full height of the front area for installation of A-100 modules.\u003c\/p\u003e\n\u003ch3\u003eMeasures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eoutside: approx. 510 (width) x 210 (height) x 420 (depth) mm\u003c\/li\u003e\n\u003cli\u003einside: 2 x 84 HP x 3 U\u003c\/li\u003e\n\u003cli\u003eusable depth for A-100 modules front row: approx. 70 mm\u003c\/li\u003e\n\u003cli\u003eusable depth for A-100 modules rear row: approx. 90 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight (without modules): about 9 kg\u003c\/p\u003e\n\u003ch3\u003eElectrical specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003emains voltage: 115V~ or 230V~ (please specify when you order)\u003c\/li\u003e\n\u003cli\u003eoutput voltages\/current: +12V\/1200mA, -12V\/1200mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052006871229,"sku":"1015986","price":1457.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100pb-monster-base.png?v=1628640446"},{"product_id":"doepfer-a-100pmb-monster-base-168hp-6u","title":"Doepfer A-100PMB Monster Base 168HP\/6U","description":"\u003cp\u003eThe A-100 Monster Base has the same width as the A-100 Monster Cases (A-100PMS6\/9\/12) and is planned as a base frame for the A-100 Monster Cases. But it can be used also as a stand alone unit without the Monster Case. It has a removeable top cover with handle for easy transportation. Two A-100 power supplies (PSU2) and four bus boards are built in.\u003cbr\u003eThe A-100 Base Frame has two rows for modules available: one with horizontal alignment and another 45 degrees inclined row. The useable width is the same as for the Monster Case, i.e. 168 HP. Because of the more complicated mechanical construction the lenght of the Monster Base is a bit more than the lenght of the Monster case. This has the advantage that even two standard suitcases or low cost suitcases can be positioned side by side on top of the A-100 base frame.\u003cbr\u003eAll bus boards are located in the rear area (even those for the modules that are mounted in the front row). This was necessary to take advantage of the full height of the front area for installation of A-100 modules. The max. depth for modules in the front row is ~70 mm.\u003cbr\u003eOn the A-100 Monster Base page more pictures can be found.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eoutside dimensions: ~ 930 (width) x 420 (depth) x 210 (height), measures in mm\u003c\/li\u003e\n\u003cli\u003euseable width: 168 HP\u003c\/li\u003e\n\u003cli\u003euseable depth of the front row: ~ 70 mm\u003c\/li\u003e\n\u003cli\u003eusable depth for A-100 modules rear row: ~ 90 mm\u003c\/li\u003e\n\u003cli\u003eweight: ~ 13.5 kg (without modules)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003emains voltage: 115V~ or 230V~ (please specify when you order)\u003c\/li\u003e\n\u003cli\u003eoutput voltages\/current: +12V\/2400mA, -12V\/2400mA (two A-100 PSU2 with 1200mA each)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052006903997,"sku":"1015987","price":2016.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100pmb-monster-base.png?v=1628640459"},{"product_id":"doepfer-a-100pms6-monster-case-single-version-168hp-6u","title":"Doepfer A-100PMS6 Monster case Single Version 168HP\/6U","description":"\u003cp\u003eThe monster cases are available even with 6U and 9U. The reason for these additional cases is that the 12U monster cases are a bit difficult to handle by one person only. At least for the double version A-100PMD12 two persons are necessary. On top of this it is necessary to have available smaller versions of the monster cases when they are mounted together as shown in the pictures on the left side (because of stability and appearance - with a 6U case as upper element the construction looks not that \"intimidating\").\u003c\/p\u003e\n\u003cp\u003eThe pictures show an assembly that consists of a monster base frame A-100PMB and two 9U single monster cases A-100PMS9. The three components have to be fixed at the rear side by screw fittings to obtain stability and avoid overturning. For transportation the screw fittings can be released so that each of the three components can be carried by one person only.\u003cbr\u003eTwo types of connector sets for the monster cases are available: straight (A-100MVG) and angled (A-100MVW). You find the sets in the price list near the monster cases.\u003cbr\u003eFor the connection between A-100PMB and the A-100PMSx on top of the A-100PMB a straight connector set is used. For the connection of the two A-100PMSx the straight or the angled connector set can be used (as shown in the picture). Each set includes two connectors (straight or angled), 4 hexagon screws and washes. The picture shows the prototypes of the connectors. The final version of the connector sets is black coated (not blank metal) and the angled version has a fixed angle (no hinge)..\u003c\/p\u003e\n\u003cp\u003eThe 6U monster case A-100PMS6 are equipped with two power supplies (A-100PSU2) and four bus boards, the 9U version A-100PMS9 with two power supplies (A-100PSU2) and six bus boards\u003c\/p\u003e\n\u003cp\u003eSingle version of the 6U\/168HP A-100 monster case with 6U\/168HP (A-100PMS6):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eoutside dimensions (with front cover, closed state): ~ 90 (length) x 35 (height) x 23 (depth) cm\u003c\/li\u003e\n\u003cli\u003eweight of the case (incl. bus boards, power supplies, with front cover, without modules): ~ 10.5 kg\u003c\/li\u003e\n\u003cli\u003eoutside dimensions of the case (without front cover): ~ 90 (length) x 35 (height) x 18 (depth) cm\u003c\/li\u003e\n\u003cli\u003eavailable 19\" width and height: 6 U x 168 HP\u003c\/li\u003e\n\u003cli\u003emax. module current: 2.4A (two power supplies 1.2A each, one power supply is assigned to two bus boards)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052008673469,"sku":"1015988","price":1887.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100pms6-single-version-monster-case.png?v=1628640520"},{"product_id":"doepfer-a-100pms9-single-version-monster-case-168hp-9u","title":"Doepfer A-100PMS9 Single Version Monster Case 168HP\/9U","description":"\u003cp\u003eThe monster cases are available even with 6U and 9U. The reason for these additional cases is that the 12U monster cases are a bit difficult to handle by one person only. At least for the double version A-100PMD12 two persons are necessary. On top of this it is necessary to have available smaller versions of the monster cases when they are mounted together as shown in the pictures on the left side (because of stability and appearance - with a 6U case as upper element the construction looks not that \"intimidating\").\u003c\/p\u003e\n\u003cp\u003eThe pictures show an assembly that consists of a monster base frame A-100PMB and two 9U single monster cases A-100PMS9. The three components have to be fixed at the rear side by screw fittings to obtain stability and avoid overturning. For transportation the screw fittings can be released so that each of the three components can be carried by one person only.\u003cbr\u003eTwo types of connector sets for the monster cases are available: straight (A-100MVG) and angled (A-100MVW). You find the sets in the price list near the monster cases.\u003cbr\u003eFor the connection between A-100PMB and the A-100PMSx on top of the A-100PMB a straight connector set is used. For the connection of the two A-100PMSx the straight or the angled connector set can be used (as shown in the picture). Each set includes two connectors (straight or angled), 4 hexagon screws and washes. The picture shows the prototypes of the connectors. The final version of the connector sets is black coated (not blank metal) and the angled version has a fixed angle (no hinge)..\u003c\/p\u003e\n\u003cp\u003eThe 6U monster case A-100PMS6 are equipped with two power supplies (A-100PSU2) and four bus boards, the 9U version A-100PMS9 with two power supplies (A-100PSU2) and six bus boards\u003c\/p\u003e\n\u003cp\u003eSingle version of the 9U\/168HP A-100 monster case with 9U\/168HP (A-100PMS9):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eoutside dimensions (with front cover, closed state): ~ 90 (length) x 48 (height) x 23 (depth) cm\u003c\/li\u003e\n\u003cli\u003eweight of the case (incl. bus boards, power supplies, with front cover, without modules): ~ 14 kg\u003c\/li\u003e\n\u003cli\u003eoutside dimensions of the single case (without front cover): ~ 90 (length) x 48 (height) x 18 (depth) cm\u003c\/li\u003e\n\u003cli\u003eavailable 19\" width and height: 9 U x 168 HP\u003c\/li\u003e\n\u003cli\u003emax. module current: 2.4A (two power supplies 1.2A each, one power supply is assigned to three bus boards)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052008706237,"sku":"1015989","price":2243.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100pms9-single-version-monster-case.png?v=1628640536"},{"product_id":"doepfer-a-100lc3-low-cost-w-power-supply","title":"Doepfer A-100LC3 Low Cost w\/ Power Supply","description":"\u003cp\u003eThis is the 3U version of the low cost cases A-100LC6\/LC9. The A-100LC3 is very similar to the A-100LC6 but offers only one row with 84 HP for installation of modules. A-100LC3 is equipped with one power supply (1200mA) and one bus board. Because of the limited space the power suppy of the DIY-Kit #1 with an external transformer is used (same as for the DIY-Kit #1). At the left side of the case the connector for the external transformer is located. The external transformer is not shown in the pictures. The case is made of raw wood without laquering. The case can be varnished by the customer in any desired color e.g. by means of a spray can (like the pictures that shows a black and a blue varnished version).\u003c\/p\u003e\n\u003ch3\u003eMeasures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eoutside: approx. 445 (width) x 160 (depth) x 150 (height)\u003c\/li\u003e\n\u003cli\u003einside: 1 x 84 HP x 3 U (one bus board), useable depth for A-100 modules: approx. 110 mm (measured from inner side of the front panel until end of the pc board of the module)\u003c\/li\u003e\n\u003cli\u003eWeight (without modules): about 2.5 kg without external transformer, about 3.5 kg with external transformer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003emains voltage: 115V~ or 230V~ (please specify when you order)\u003c\/li\u003e\n\u003cli\u003eoutput voltages\/current: +12V\/1200mA, -12V\/1200mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052008739005,"sku":"1015990","price":477.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100lc3-low-cost-power-supply.png?v=1628640384"},{"product_id":"doepfer-a-100lc6-low-cost-w-ac-cord","title":"Doepfer A-100LC6 Low Cost w\/ AC Cord","description":"\u003cp\u003eThis is an economical version of the A-100 suitcase. It is made very simple without front cover, without the metal rails and corners of the suitcase version described above. In other respects the low cost suitcase is identical to the suitcases described above (i.e. it includes the A-100 PSU2 and two bus boards).\u003c\/p\u003e\n\u003cp\u003eThe case is made of raw wood without laquering. By default it's available with the mains inlet located at the rear panel (same as V2 of the standard suitcase). Versions with other positions of the mains inlet are available only upon request (additional charge and longer delivery time). The case can be varnished by the customer in any desired color e.g. by means of a spray can (like the pictures that shows a black and a blue varnished version).\u003c\/p\u003e\n\u003ch3\u003eMeasures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eoutside: approx. 445 x 275 x 160 mm\u003c\/li\u003e\n\u003cli\u003einside: 2 x 84 HP x 3 U (two bus boards), useable depth for A-100 modules: approx. 80 mm in the power supply area (bottom right), resp. approx. 110 mm in the remaining area (measured from inner side of the front panel until end of the pc board of the module)\u003c\/li\u003e\n\u003cli\u003eWeight (without modules): about 4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003emains voltage: 115V~ or 230V~ (please specify when you order)\u003c\/li\u003e\n\u003cli\u003eoutput voltages\/current: +12V\/1200mA, -12V\/1200mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn the area near the power supply (bottom right) no modules should be assembled that are sensitive against transformer hum. We recommend to assemble only control voltage modules in this area (e.g. LFO, ADSR, trigger delay, clock divider\/sequencer, sequencer, slew limiter, MIDI interfaces and so on) but no audio modules (VCO, VCF, VCA, VCP, frequency shifter, ring modulator, spring reverb and so on). Even modules width increased depth (e.g. A-113 or A-126) cannot be assembled in the power supply area. They have to be placed in a position outside the power supply area (e.g. in the upper row). But this applies only for a few modules. Normally it is no problem to arrange all modules by mounting modules with smaller depth in the power supply area.\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":41666842329277,"sku":"1015991","price":777.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100lc6-low-cost-ac-cord.png?v=1628640360"},{"product_id":"doepfer-a-100lc9-low-cost-w-ac-cord","title":"Doepfer A-100LC9 Low Cost w\/ AC Cord","description":"\u003cp\u003eThis an enlarged version of the A-100 low cost case with 9 U or three rows of modules. As only one power supply is required this is the most economic version of the A-100 low cost case. Apart from that the 9U version is identical to the 6U version.\u003c\/p\u003e\n\u003cp\u003eThe case is made of raw wood without laquering. The case can be varnished by the customer in any desired color e.g. by means of a spray can.\u003cbr\u003eIt is also available with black coating: A-100LC9V\u003c\/p\u003e\n\u003ch3\u003eMeasures:\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eoutside: approx. 445 (width) x 420 (height) x 160 (depth) mm\u003cbr\u003einside: 3 x 84 HP x 3 U (three bus boards)\u003cbr\u003eusable depth for A-100 modules: approx. 80 mm in the power supply area (bottom right), resp. approx. 110 mm in the remaining area (measured from inner side of the front panel until end of the pc board of the module)\u003c\/p\u003e\n\u003cp\u003eQuantity of bus boards: 3\u003c\/p\u003e\n\u003cp\u003eWeight (without modules): about 5,2 kg\u003c\/p\u003e\n\u003cp\u003eMaximum Output Current:\u003cbr\u003ewith built-in A-100PSU3 (since about early 2016): +12V\/2000 mA, -12V\/1200mA, +5V\/4000mA\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052008771773,"sku":"1015992","price":923.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100lc9-low-cost-ac-cord.png?v=1628640342"},{"product_id":"doepfer-a-100lcb-low-cost-base-frame-w-ac-cord","title":"Doepfer A-100LCB Low Cost Base Frame w\/ AC Cord","description":"\u003cp\u003eThe A-100 Low Cost Base has the same width as the A-100 Low Cost Cases (A-100LC6\/LC9) and is planned as a base frame for the A-100 Low Cost Cases. But it can be used also as a stand alone unit. One power supply (PSU2) and two bus boards are built in.\u003c\/p\u003e\n\u003cp\u003eThe A-100 Low Cost Base has two rows for modules available: one with horizontal alignment and another 45 degrees inclined row. The useable width is the same as for the Low Cost Cases, i.e. 84 HP. The bus boards are located in the rear area (even those for the modules that are mounted in the front row). This was necessary to take advantage of the full height of the front area for installation of A-100 modules. The max. depth for modules in the front row is ~70 mm.\u003c\/p\u003e\n\u003ch3\u003eMeasures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eoutside: about 445 (width) x 80 height (front) \/ 190 height (rear) x 385 (depth) mm\u003c\/li\u003e\n\u003cli\u003einside:: 2 x 84 TE x 3 HE (two bus boards)\u003c\/li\u003e\n\u003cli\u003euseable width: 84 HP\u003c\/li\u003e\n\u003cli\u003euseable depth of the front row: ~ 70 mm\u003c\/li\u003e\n\u003cli\u003euseable depth of the top row: ~ 110 mm (reduced to ~ 100 mm in the power supply area)\u003c\/li\u003e\n\u003cli\u003e(useable depth is measured from inner side of the front panel until end of the pc board of the module)\u003c\/li\u003e\n\u003cli\u003eWeight: ~ 4.5 kg (without modules)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003emains voltage: 115V~ or 230V~ (please specify when you order)\u003c\/li\u003e\n\u003cli\u003eoutput voltages\/current: +12V\/1200mA, -12V\/1200mA (1 x A-100PSU2)\u003c\/li\u003e\n\u003cli\u003enumber of bus boards: 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052008804541,"sku":"1015993","price":923.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfer-a-100lcb-low-cost-base-frame-ac-cord.png?v=1628640325"},{"product_id":"doepfer-a-101-1-vactrol-multitype-filter","title":"Doepfer A-101-1 Vactrol Multitype Filter","description":"\u003cp\u003eThis is the first vactrol based module in the A-100 system. A vactrol is a combination of a light depending resistor (LDR) and a LED (light emitting diode) both put into a small light-proof case. For more general details about vactrols please look at the Vactrol Basics page information. Increasing the LED brightness causes a decrease of the LDR resistance (e.g. the light controlled voltage module A-179 is an application of a LDR). This effect can be used in circuits that require variable resistors to obtain the desired function (e.g. VCFs, VCAs, VC phasers, VC trigger delays, VC slew limiters, VC Envelope Generators, VC LFOs, VCOs and many more). The advantage of vactrols compared with other solutions (e.g. OTAs, diodes, transistors or FETs as variable resistors) is that they behave like a normal Ohm resistor and can handle high voltages without causing distortion. This is probably the reason why the sound of vactrol-based circuits usually is described as soft or mellow. Disadvantages are the expenditure and consequently the expenses and the not exactly defined coherence between LED current and LDR resistance. For each vactrol the LDR resistance decreases when the LED current increases but mechanical and electrical tolerances cause that each vactrol will behave a bit different (e.g. because of the differences in alignement and distance between LED and LDR, different brightness of the LEDs at the same current).\u003c\/p\u003e\n\u003cp\u003eModule A-101-1 is a special multitype filter based on an idea by Nyle A. Steiner (published in Electronic Design, issue 25, December 1974, page 96 ff). The circuit uses the standard non-inverting amplifier filter design. Different filter types (low pass \/ LP, band pass \/ BP, high pass \/ HP) are realized by injecting the audio signal into different points of the circuit and using a common output for all filter types. One may feed three different audio signals into the filter simultaneously. Each signal is filtered correspondingly (LP resp. BP resp. HP) and the sum of the three filtered signals appears at the output. Of course it is possible to feed the same signal to all three inputs. In this case one obtains different combinations of LP\/BP\/HP according to the settings of the three input attenuators for LP\/BP\/HP. Even a Notch filter is possible (not available in the original design). The filter inputs are normalled, i.e. the BP input is connected to the LP jack socket provided that no cable is plugged into the BP socket (same applies for HP\/BP inputs). If you are interested in technical details concerning the A-101-1 we have additional information available: A-101-1 Technical Details.\u003c\/p\u003e\n\u003cp\u003eIn contrast to the original circuit vactrols are used instead of diodes as variable resistors for frequency control of the filter. Due to the\"crooked\" response of vactrols the filter has not an exact frequency control standard (like V\/Oct). The inevitable tolerances between different vactrols will lead to an individual sound of each module and individual resonance behaviour. Even the resonance control is realized with vactrols. Consequently this parameter is voltage controlled, too. Resonance can be increased up to self-oscillation. Resonance and consequently self-oscillation may vary with the filter frequency because of vactrol tolerances.\u003c\/p\u003e\n\u003cp\u003eA special feature of the module are the two audio outputs. Out 1 is the output of the original circuit. In the original circuit by Nyle A. Steiner the output level was distinctly dependent upon the resonance (higher resonance = higher output level). Out 2 compensates this behaviour by the usage of an additional vactrol that is connected in series to the vactrol that controls the resonance. This additional vactrol forms an attenuator (or simple VCA) that approximately compensates the level increase for higher resonance settings.\u003c\/p\u003e\n\u003cp\u003eTwo LED displays show the current frequency and resonance setting. The LEDs are connected in series to the LEDs inside the vactrols and show consequently the LED illumination inside the vactrols.\u003c\/p\u003e\n\u003cp\u003eBreite\/Width: 16TE \/ 16HP \/ 80.9 mm\u003cbr\u003eTiefe\/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003eStrombedarf\/Current: 30 mA\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052008837309,"sku":"1015997","price":259.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1011vactrolmultitypefilter.png?v=1625885508"},{"product_id":"doepfer-a-101-2-low-pass-gate","title":"Doepfer A-101-2 Low Pass Gate","description":"\u003cp\u003eA-101-2 is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292. The term \"Low Pass Gate\" was created by Don Buchla and stands for a module that can be switched between low pass and VCA. The control (manually and via external CV) is responsible for frequency in the low pass mode and for loudness in the VCA mode. Additionally a combined mode LP+VCA is available. In this mode the sound becomes more dull as the loudness decreases.\u003cbr\u003eIn contrast to the Buchla design the A-101-2 offers attenuators for both CV and audio input, a manual resonance control and two gate inputs to control the function of the module in addition to the manual toggle switch.\u003cbr\u003eIn principle the A-101-2 is a 12 dB low pass filter that can be switched to VCA or a combination of Low Pass and VCA. The controlling elements for frequency (LP mode) resp. amplitude (VCA mode) are so-called vactrols. Vactrols are known for their smooth sound behaviour. For more general details about vactrols please look at the Vactrol Basics page. Because of the vactrol circuit the audio signal is not fully attenuated in the VCA mode at the minimum setting of the F\/A control.\u003cbr\u003eThe Frequency (in the LP mode) resp. the Amplitude (in the VCA mode) is controlled manually (F\/A) and by the 2 control inputs CV1 (without attenuator) and CV2 (with attenuator).\u003cbr\u003eThe audio input is equipped with an attenuator to enable distortion too (above ~ position 5 distortion is obtained with standard A-100 audio levels, e.g. VCO).\u003cbr\u003eThe resonance function \"colors\" to the sound and is adjustable all the way up to self-oscillation. Resonance and consequently self-oscillation may vary with the filter frequency because of vactrol tolerances. Due to the circuit the resonance has a little bit an influence on the audio level (increasing resonance = increasing audio level). To obtain the original Buchla sound the resonance control simply has to be set fully counterclockwise.\u003cbr\u003eThe function of the module is controlled by a manual switch. The left and right positions of the switch correspond to LP resp. VCA mode. In the middle position one obtains the combination of Low Pass and VCA. In this position it is also possible to control the function of the module by the two Gate inputs G1 and G2. The table printed at the front panel shows the connection between the gate levels (L = low, H = high) and the module function.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e Tiefe\/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e Strombedarf\/Current: 20 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307294888125,"sku":"1015998","price":178.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1012lowpassgate.png?v=1625885510"},{"product_id":"doepfer-a-101-6-6stage-opto-fet-filter","title":"Doepfer A-101-6 6stage Opto Fet Filter","description":"\u003cp\u003eA-101-6 is a new filter module that uses so-called opto FETs to control the filter frequency. Opto FETs are very similar to Vactrols but use light depending field effect transistors (FETs) instead of light depending resistors (LDRs). A opto FET is a combination of a light depending FET and a LED (light emitting diode) both put into a small light-proof case. The advantage compared to vactrols is the much faster response of opto FETs compared to LDRs. This allows much faster attack\/decay times and even FM effects. The disadvantage compared to vactrols is that the FET behaves as a normal Ohm resistor only for small levels. With higher levels the FET begins to distort. Apart from this the notes mentioned on the Vactrol Basics page are valid.\u003c\/p\u003e\n\u003cp\u003eModule A-101-6 is made of six serial 6dB filter stages. Each stage can work as lowpass, highpass or one of two allpass types.\u003c\/p\u003e\n\u003cp\u003eThe variable resistors shown in the schematics corresponds to the opto FET. The brightness of the Opto FET LEDs and consequently the filter frequency can be adjusted manually (Frequ. control) and controlled by means of an external control voltage (CV) with attenuator. The LED at the front panel reflects the LED brightness inside the opto FETs.\u003c\/p\u003e\n\u003cp\u003eThe type of filter is chosen by jumpers on the pc board (factory setting: low pass). The type of filter determined by the jumpers positions can be marked by means of a water-resistant felt pen at the front panel. The following document shows the jumper positions for the four different filter types: A-101_6_Jumper.pdf. The document describes also the adjustment of the trimming potentiometer for the max. resonance\/feedback.\u003c\/p\u003e\n\u003cp\u003eThe resonance is controlled by the Feedback control up to self oscillation. By means of a trimming potentiometer the maximal feedback can be adjusted. High feedback values can be used mainly in the allpass mode to obtain very extreme self oscillation sounds. Even an external feedback signal can be used instead of the internal feedback connection (FB In socket). Whenever the filter type is changed by means of the jumpers the trimming potentiometer for the maximal feedback has to be re-adjusted\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Mix control is used to pan between the original signal (CCW position) and the effect signal (CW position). In filter mode (LP\/HP) this control is usually set fully CW. In the allpass modes one obtains phasing sounds at center position or \"pure\" allpass sound in fully CW position.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e Tiefe\/Depth: 65 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e Strombedarf\/Current: 40 mA\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307295183037,"sku":"1016000","price":178.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera10166stageoptofetfilter.png?v=1625885514"},{"product_id":"doepfer-a-102-diode-low-pass-filter","title":"Doepfer A-102 Diode Low Pass Filter","description":"\u003cp\u003eModule A-102 is a reproduction of the legendary low pass filter design that uses diodes in the filter stage as frequency controlling elements resulting in \"strange\" resonance behaviour and frequency response as resonance and frequency are not independent from another.\u003c\/p\u003e\n\u003cp\u003eAs for the rest the A-102 is identical to the A-120 Moog low pass filter resp. the A-103 (18dB TB303 Filter). I.e. the same controls, inputs and outputs. Only the filter sound is different:\u003c\/p\u003e\n\u003cp\u003emanual control of filter frequency\u003cbr\u003e3 CV inputs (CV1, CV2, CV3), 2 of them with attenuator (CV2, CV3)\u003cbr\u003einput level control\u003cbr\u003eresonance control up to self oscillation (depends upon the frequency setting for the A-102)\u003c\/p\u003e\n\u003cp\u003eThe English manual will be available about May 2003. Until then you may look at the user's guide of A-120 or A-103.\u003c\/p\u003e\n\u003cp\u003e(As all the A-12x numbers are used up we will have to assign another number to this filter. Probably we will use the A-10X numbers)\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 60 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: 30 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052008935613,"sku":"1016001","price":161.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera102diodelowpassfilter.png?v=1625885517"},{"product_id":"doepfer-a-103-18db-low-pass-filter","title":"Doepfer A-103 18DB Low Pass Filter","description":"\u003cdiv id=\"cnp\"\u003eDoepfer A-103, 18dB Low Pass Filter for Modularsystem A 100. Module A-103 is a voltage controlled low pass filter thomann with 18dB\/octave slope. The circuit is based on a modified transistor ladder (Moog ladder) and is a reproduction of the legendary TB303 filter.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cspan\u003eWidth: 8TE \/ 8HP \/ 40.3 mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDepth: 55 mm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eCurrent: 30mA\u003c\/span\u003e\u003c\/div\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009033917,"sku":"1016002","price":161.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera10318dblowpassfilter.png?v=1625885518"},{"product_id":"doepfer-a-104-quad-resonance-filter","title":"Doepfer A-104 Quad Resonance Filter","description":"\u003cp\u003eA-104 is a fourfold formant filter as used in the Mixtur Trautonium by Oskar Sala. It is made of four parallel resonance filters, each filter can be switched to low pass or band pass or off. Frequency, resonance and level are controlled for each filter separately (no voltage control). The frequency range for the filters is about 50Hz...5kHz. The filter audio inputs are very sensitive so that distortion may intentionally be used to create new sounds - if desired. The sketch below shows the basic layout of the A-104. The A-104 is a versatile module for sound modification. In the first place it is used for reproduction of resonances (e.g. the vocal-like effects known from the Trautonium). In combination with the subharmonic generator A-113, the Trautonium Manual A-198 and some other A-100 modules one obtains a Trautonium replica\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 20 TE \/ 20 HP \/ 101.2 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 45 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: 30mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009099453,"sku":"1016003","price":267.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera104quadresonancefilter.png?v=1625885520"},{"product_id":"doepfer-a-106-1-xtreme-filter","title":"Doepfer A-106-1 Xtreme Filter","description":"\u003cp\u003eModule A-106-1 has it's origin in our experiments to built a MS20 filter clone. The module is not exactly the same as the MS20 filter but similar. The famous original MS20 included two filters: a 12 dB lowpass and a 6dB high pass filter connected in series both with a very special design (the MS20 highpass if very often described as 12dB high pass, but this is not true). During our researches we found a way to use the same circuit simultaneously as lowpass and highpass for 2 different audio signals (a bit similar to the A-101-1 Steiner Vactrol filter that has even different audio inputs available, but with the special MS20 circuit). For this two separate audio inputs for lowpass (LP) and highpass (HP) with separate level controls are available. The sockets are normalled, i.e. the signal applied to the LP input is available for the HP input too provided that no plug is inserted into the HP input socket. The level control of the HP input is realized as a polarized input. This means that the signal can be added with the same polarity (+ range) or opposite polarity (- range) compared to the LP input. This feature enables notch (+) and bandpass (-) filter functions too. From our point of view this is the most flexible solution that enables e.g. these functions:\u003c\/p\u003e\n\u003cp\u003eLowpass: the audio signal is fed to the LP input, HP level control is set to zero, LP level control is set to the desired level\u003cbr\u003eHighpass: the audio signal is fed to the LP or HP input, LP level control is set to zero, HP level control is set to the desired level (in this special case it does not matter if positive or negative amplification is chosen with the polarizer control)\u003cbr\u003eLowpass\/highpass mix with one audio signal: the audio signal is fed to the LP input, LP and HP level controls are set to the desired levels.\u003cbr\u003especial setting 1: if the level controls for LP and HP are set in a way that both levels are identical with the same polarity (i.e. + range of the HP level control) and no or little distortion only one obtains ~ a notch filter (the \"~\" indicates that the notch is far from beeing perfect, the attenuation in the passband is not as good as for other filters of the A-100 system, look at the frequency response curves at the bottom of this decoment for details)\u003cbr\u003especial setting 2: if the level controls for LP and HP are set in a way that both levels are identical with the opposite polarity (i.e. - range of the HP level control) and no or little distortion only one obtains ~ a bandpass filter (the \"~\" indicates that even the bandpass is far from beeing perfect, there is a significant feedthrough of frequencies below and above the center frequency, look at the frequency response curves at the bottom of this decoment for details)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009296061,"sku":"1016004","price":218.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1061xtremefilter.png?v=1625885524"},{"product_id":"doepfer-a-106-5-12db-sem-vcf","title":"Doepfer A-106-5 12DB SEM VCF","description":"\u003cp\u003eModule A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.The filter is equipped with a band pass output and a combined low\/notch\/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system. The module generates a distorted audio signal if the level control is set to about 50% (i.e. center position) or more with A-100 standard signals like VCOs.\u003c\/p\u003e\n\u003cp\u003eInputs: Audio In, CV1 In without attenuator, CV2 In with Polarizer\u003cbr\u003eOutputs: Bandpass Out, Low\/Highpass Mix-Out\u003cbr\u003eControls: Audio Attenuator, CV2 Polarizer, Frequency, Resonance, LP\/HP Mix\u003c\/p\u003e\n\u003cp\u003eThe function and operation of this module is very similar to the Wasp filter module A-124. But the sound of both filters is very different ! We will publish no separate user's manual for the A-106-5 but a combined manual for both A-106-5 and A-124. The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 55 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 30 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009328829,"sku":"1016005","price":161.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera106512dbsemvcf.png?v=1625885525"},{"product_id":"doepfer-a-106-6-xp-filter","title":"Doepfer A-106-6 XP Filter","description":"\u003cp\u003eModule A-106-6 is a multimode filter that is based on the filter circuit of the Oberheim Xpander. The module features 15 different filter types (those filters of the A-107 that were available in the Xpander) with 8 filters available simultaneously. The toggle switch Filter Group is used to switch between 2 filter groups.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eThrese filter types are available:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e1L (6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2L (12 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3L (18 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e4L (24 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e1H (6 dB high pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2H (12 dB high pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3H (18 dB high pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2B (6 dB band pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e4B (12 dB bandpass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2N (notch)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3A (allpass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2H1L (asymmetrical band pass made of a 12 dB high pass and a 6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3H1L (asymmetrical band pass made of a 18 dB high pass and a 6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e2N1L (combination of notch and 6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e3A1L (combination of allpass and 6 dB low pass)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe module features voltage controlled resonance. For filter group 2 (2L, 4L, 2B ...) even self oscillation is possible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll standard VCF controls are available: manual filter frequency control \u003ci\u003eFrq\u003c\/i\u003e, one control voltage input with attenuator (\u003ci\u003eFCV2\u003c\/i\u003e)and one  without attenuator (FCV1, ~ 1 V\/octave). In addition voltage controlled resonance with \u003c\/span\u003e\u003cspan\u003emanual control (\u003ci\u003eQ\u003c\/i\u003e)  and a CV input with attenuator (\u003ci\u003eQCV\u003c\/i\u003e) are available. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe circuit is based on a 24dB lowpass filter. The outputs of the four internal filter stages (i.e. the 6, 12, 18 and 24dB outputs) are mixed together with different levels and polarities to obtain 15 different filters. Because of this special circuit the outputs have slightly different levels and noise floor. This is caused by the different internal amplifications and numbers of stages that are required to generate the filter in question. If e.g. a filter is derived by one stage only (e.g. the 6 dB, 12dB, 18dB and 24dB low pass) the noise floor is smalles compared to a filter that is derived by a combination of all four filter stages.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBreite\/Width: 12 TE \/ 12 HP \/ 60.6 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 50 mA\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009394365,"sku":"1016006","price":291.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1066xpfilter.png?v=1625885527"},{"product_id":"doepfer-a-108-6-12-24-48db-low-pass-band-pass","title":"Doepfer A-108 6\/12\/24\/48DB Low Pass\/Band Pass","description":"\u003cp\u003eModule A-108 is a completely new voltage-controlled low pass pass filter based on the well-known transistor ladder (Moog ladder). The module has internally an 8 stage low pass filter with different slopes available: 6, 12, 18, 24, 30, 36, 42 and 48 dB per octave. In addition it features an band pass output (i.e. band pass with transistor ladder). In the factory the 4 low pass outputs of the A-108 are internally connected to the filter stages 6, 12, 24 and 48dB. From our first A-108 audio tests this seems to be the best output combination as these outputs generate audible different sounds. E.g. the audible difference between the 48dB and 42dB or between 42dB and 36dB is very little. But if desired any of the filter stages can be connected to one of the outputs.\u003c\/p\u003e\n\u003cp\u003eRemark: Only 4 output stages are available as this seems to be sufficient from our experiences. In the factory the out stages are connected to the filter stages with 6, 12, 24 and 48 dB slope. By changing the internal connections (jumpers or wires) each of the filter stages can be used but only four at a time. Even a multi-way switch could be used but from our results the factory setting (6\/12\/24\/48dB) is the best combination for musical applications. From our experience it would e.g. make not much sense to have 30dB, 36dB, 42dB and 48dB available simultaneously - but if desired one could have this combination avaiable. More details below (after the frequency response pictures).\u003c\/p\u003e\n\u003cp\u003eResonance (Emphasis or Q ) can be adjusted manually right up to self-oscillation, in which case the filter will behave like a sine wave oscillator. The A-108 features an external feedback input that enables the insertion of additinal modules into the feedback path (e.g. VCA for voltage controlled resonance or phaser\/frequency shifter for phase\/frequency shifting effects). The socket is normalized and internally connected to the 48dB low pass output if no cable is inserted into the feedback socket.\u003c\/p\u003e\n\u003cp\u003eThe frequency can be adjusted manually, or by voltage control. Three CV inputs (CV1, CV2, CV3) are available. CV2 and CV3 are eqipped with attenuators.\u003c\/p\u003e\n\u003cp\u003eThe filter audio input is very sensitive so that distortion - if desired - is possible even with normal A-100 levels (e.g. VCO output). Self oscillation will break off at high distortion levels as the internal feedback signal is drown out by the distorted audio signal. This feature may intentionally be used to create new sounds.\u003c\/p\u003e\n\u003cp\u003eIn combination with the Voltage Controlled Mixer A-135 and the Morphing Controller A-144 a filter with voltage controlled slope can be realized (i.e. controlling the slope from 6dB to 48dB via CV).\u003c\/p\u003e\n\u003cp\u003eThe sketches below show the frequency response of the five filter outputs at three different resonance settings.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWidth: 12HP \/ 60.6 mm\u003cbr\u003e \u003c\/span\u003e \u003cspan\u003eDepth: 75 mm (measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Current: 40 mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009459901,"sku":"1016007","price":291.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1086122448dblowpassbandpass.png?v=1625885529"},{"product_id":"doepfer-a-110-1-standard-vco","title":"Doepfer A-110-1 Standard-VCO","description":"\u003cp\u003eModule A-110-1 is a voltage-controlled oscillator. This VCO's frequency range is about eight octaves (ca. 15Hz ... 8kHz). It can produce four waveforms simultaneously: rectangle, sawtooth, triangle, and sine wave (triangle and sine shapes are not perfect, see remark below). The output levels are typically 8Vpp for saw and rectangle, and 10Vpp for triangle and sine. The frequency or pitch of the VCO is determined by the position of the octave (Range) switch and tuning (Tune) knob, and by the voltage present at the CV inputs. Frequency modulation (FM) of the VCO is therefore a possibility. Footage (the octave of the fundamental) is set by the Range control in five steps, and Fine tuning controlled by the Tune knob by about +\/-1 one semitone (can be modified for a wider range).\u003cbr\u003eYou can control the pulse width of the square wave either by hand, or by voltage control - Pulse Width Modulation or PWM.\u003cbr\u003eFor more detailed information please look at the user's manual A110_man.pdf. In addition the A-110 service manual is available as an example for the A-100 service manual that is available at extra charges. This document describes also how to modify the sensitivity of the tune control, how to re-adjust the 1V\/octave scale and the frequency offset (i.e. the absolute pitch). Such modifications should be carried out by experienced users only !\u003c\/p\u003e\n\u003cp\u003eTechnical remarks:\u003cbr\u003eThe core of the A-110-1 is a sawtooth oscillator (in contrast to the A-111-1, which is based on a triangle oscillator). The other waveforms are derived from the sawtooth by internal waveform converters. As the sawtooth reset (i.e. the back-to-zero slope) is not infinite fast but takes a little bit of time the derived waveforms triangle and sine are not perfect ! At the top of the waveform they have a small glitch or notch that is caused by the sawtooth reset and cannot be eliminated by the waveform converters. The sine is derived from the triangle by a simple diode-based converter and the sine shape is not perfect (only a rounded triangle).\u003cbr\u003eIf a perfect triangle is required the A-111-1 is recommended. For a perfect sine wave the thru zero quadrature VCO A-110-4 or the quadrature LFO\/VCO A-143-9 is recommended.\u003cbr\u003eThe sawtooth output of the A-110-1 has a falling (or negative) slope as shown on the front panel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 10TE \/ 10HP \/ 50.5 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 55 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: +90mA (+12V) \/ -20mA (-12V)\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009722045,"sku":"1016008","price":315.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1101standardvco.png?v=1625885532"},{"product_id":"doepfer-a-110-2-basic-vco","title":"Doepfer A-110-2 Basic VCO","description":"\u003cp\u003eModule A-110-2 is a low-cost voltage-controlled oscillator. It's a slightly reduced version of the standard VCO A-110-1. Compared to the A-110-1 the A-110-2 has no sine output and the (expensive) octave rotary switch is replaced by a 3-position toggle switch. In return the A-110-2 is equipped with an additional linear FM input and a soft sync input. A jumper is used to select the range of the tune control between about 1\/2 octave and about 4 octaves. The width of the module is only 8 HP compared to the 10 HP of the A-110-1.\u003c\/p\u003e\n\u003cp\u003eAll other features are essentialy the same as for the A-110-1.\u003c\/p\u003e\n\u003cp\u003eExplanation of the jumpers and trimming potentiometers:\u003c\/p\u003e\n\u003cp\u003eJP2: CV connection to A-100 bus\u003cbr\u003eJP3: range of Tune control (installed = about 4 octaves, not installed = about 1\/2 octave)\u003cbr\u003eJP4: AC\/DC coupling of the linear FM input (installed = DC coupling, not installed = AC coupling)\u003cbr\u003eP5: 1V\/Oct scale\u003cbr\u003eP6: frequency offset\u003cbr\u003eP7: high-end trim\u003cbr\u003eP8: adjustment +1 Oct. range switch\u003cbr\u003eP9: adjustment -1 Oct. range switch\u003cbr\u003eP10: temperature VCO heater\u003c\/p\u003e\n\u003cp\u003eTechnical remarks:\u003cbr\u003eThe core of the A-110-2 is - like the A-110-1 - a sawtooth oscillator (in contrast to the A-111-1, which is based on a triangle oscillator). The other waveforms are derived from the sawtooth by waveform converters. As the sawtooth reset (i.e. the back-to-zero slope) is not infinitely fast but takes a little bit of time the triangle is not perfect ! At the bottom of the waveform it has a small glitch or notch that is caused by the sawtooth reset and cannot be eliminated by the waveform converter. If a perfect triangle is required the A-111-1 is recommended.\u003c\/p\u003e\n\u003cp\u003eThe sawtooth output of the A-110-21 has a falling (or negative ) slope. The front panel shows erroneously a rising (or positive) slope. This has no influence to the sound but becomes important when the module is used as an LFO or is mixed with the sawtooth output of another VCO.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 10HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: 150 mA (Aufheizperiode ca. 30 Sekunden \/ heat up period about 30 seconds), 60 mA (Dauerbetrieb \/ long-term current)\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009820349,"sku":"1016009","price":226.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera1102basicvco.png?v=1625885534"},{"product_id":"doepfer-a-112-vc-sampler-wavetable-oscillator","title":"Doepfer A-112 VC-Sampler\/Wavetable Oscillator","description":"\u003cp\u003eModule A-112 is the combination of a voltage controlled 8 Bit Sampler and a wavetable oscillator. On top of it the module is able to generate some special effects. A-112 was designed as an additional sound source with the typical sounds of the early 8 bit samplers and is not comparable with the modern polyphonic MIDI samplers available on the market.\u003cbr\u003eSampling mode: 8 bit audio resolution, 128kB memory in 2 banks 64kB each (equivalent to 2 seconds of sampling time for each bank with 32 kHz sampling rate), audio input with attenuator, overload display in record mode (gate LED), possibility of MIDI Dump to store sounds in a computer via MIDI, non volatile memory for the 2 samples in the module, manual tune control for adjustment of sampling rate for record and play, CV input (~ 1V\/Oct), both manual tune and CV determine the sampling rate respectively the pitch (pitch range is 5 octaves), gate input (not a trigger: the sample starts at the positive edge of the gate signal and is played as long as gate is high or until the end of the sample is reached), manual Gate button, non filtered audio output (thus quantizing noise can be used as an element of the sound intentionally)\u003cbr\u003eWavetable mode: special appearance of the sampling mode when playing a sample, the audio input is now used as a second control voltage input for moving through the sample in 256 byte wide loops (wavetables). The control voltage required to move through all wavetables applied to the input \"Wave CV In\" is in the range -2.5V (wavetable 1) ... 0V (wavetable 127) ... +2.5V (wavetable 256) when control \"Atten.\" is set fully clockwise. To achieve the typical wavetable oscillator sounds the sampling memory must contain corresponding wavetable data (e.g. loaded via MIDI dump). These data contain a set of wavetables with different harmonic content (e.g. a filter sweep) to get the typical wavetable sound while moving through the tables via CV. But you may also use a \"normal\" sample and go through the sample with CV to obtain partially amazing sounds never heard before. You may use for example sampled speech and go with CV through the syllables or speech shreds to get really very extreme sounds. An ideal addition for this feature is the Offset\/Attentuator module A-183-2 which can be used to adjust the position of the wavetable (Offset) and the modulation depth (Att.). The corresponding jumper of the A-183-2 has to be set to bipolar offset (as the A-112 requires -2.5V...+2.5V to pass through all 256 wavetables). As modulation source an LFO (A-145, A-146, A-147, A-143-3), ADSR (A-140, A-141, A-142, A-143-1\/2) or a random voltage (A-118, A-149-1) may be used. Even a ribbon controller (A-198 or R2M), the Theremin module A-178, the Joystick A-174 or the Wheels module A-174-2 are useful to drive through the wavetables.\u003cbr\u003eEffects: Additionally the module offers - in a way free of charge - some effects like delay, reverse delay, pitch shiftinng or freeze. But it has to be pointed out that due to the 8 bit audio reolution these effects are not comparable to high quality effect units and should be understand as an extra for nothing. The A-112 is not an effects unit !\u003c\/p\u003e\n\u003cp\u003eThe sampling time of the A-112 is about 1...30 seconds corresponding to a sampling frequency range of about 60kHz...2kHz (64kB@60kHz ~ 1 s, 64kB@2kHz ~ 30 s).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 10TE \/ 10HP \/ 50.5 mm\u003cbr\u003e Tiefe\/Depth: 100 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e Strombedarf\/Current: 50 mA\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42052009885885,"sku":"1016010","price":291.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera112vcsamplerwavetableoscillator.png?v=1625885535"},{"product_id":"doepfer-a-113-subharmonic-generator","title":"Doepfer A-113 Subharmonic Generator","description":"\u003cp\u003eModule A-113 is a new sound source that derives from an incoming pulse signal four so-called subharmonics (German: Subharmonische). The term subharmonics was introduced by Oskar Sala in connection with his so-called Mixtur-Trautonium. A subharmonic means in this context a sawtooth wave (German: Kippschwinger) whose frequency is derived from a master frequency and the master frequency is an integer multiple in the range of 1...24 of the subharmonic - in other words: the master frequency is divided by an integer 1...24 to obtain the subharmonic. Pay attention that the output waveform of a subharmonic is sawtooth (as also used in the original Trautonium) and not sine. The term subharmonics is somewhat misleading. The master frequency comes e.g. from an A-110 or A-111 to the frequency input of the A-113. The frequency dividers of the 4 subharmonics is adjusted with up\/down buttons as displayed with 2 character LED displays. The subharmonics are available as single outputs and as mix output with adjustable levels for the subharmonics.\u003cbr\u003eTwo gate type control inputs enable to select between 4 different mixtures, i.e. 4 different settings of the frequency dividers. In the original Trautonium these are controlled by foot switches to switch between 3 mixtures while playing (the original Trautonium has only 3 mixtures available but with the 2 gate inputs of the A-113 four different settings can be adressed).\u003cbr\u003eAdditionally the A-113 features a mixture memory with 50 presets. Each preset consists of 4 mixtures that can be selected with the gate inputs, each mixture contains the values of the 4 frequency dividers.\u003cbr\u003eMore detailed information about the Trautonium can be found on our internet site in the Trautonium project article. These additional Trautonium modules are available: Trautonium Manual A-198, Trautonium Filter A-104.\u003c\/p\u003e\n\u003cp\u003eInputs : master frequency (rectangle\/pulse input), foot contr. 1 + 2 (gate 1+2)\u003cbr\u003eOutputs: 4 single outputs, 1 mixture output\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 26TE \/ 26HP \/ 131.8 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 90 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eATTENTION ! Older versions of the A-113 module require an additional +5V power supply with 100mA (e.g. the separate +5V power supply or the +5V low-cost adapter)\u003cbr\u003eAll modules shipped from spring 2015 no longer require the additional +5V supply as these modules have an 5V voltage regulator (7805) on board\u003cbr\u003eThe two versions can be distinguished by means of the bus connection cable: old version = 16 wires, new version = 10 wires\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307295641789,"sku":"1016011","price":429.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera113subharmonicgenerator.png?v=1625885537"},{"product_id":"doepfer-a-114-dual-ring-modulator","title":"Doepfer A-114 Dual-Ring Modulator","description":"\u003cp\u003e\u003cspan\u003eModule A-114 contains two separate ring modulators. A ring modulator outputs the product (Multiplication X • Y) of the signals at inputs X and Y. It's similar to a VCA, but whereas a VCA only responds to positive voltages at the inputs (2-quadrant multiplication), the ring modulator responds to both positive and negative voltages (4-quadrant multiplication).\u003cbr\u003e The ring modulator thus provides a refinement of amplitude modulation (AM). Ordinary amplitude modulation will output the original carrier frequency fC as well as the two side bands (fC - fM, fC + fM) for each of the spectral components of the carrier and modulation signals - but ring modulation cancels out the carrier frequencies, and just lets the side-bands pass to the output (see Fig. 1).\u003cbr\u003e A ring modulator is used for the production of bell-like sounds, alien voices, or just to produce new timbres.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eBreite\/Width: 4TE \/ 4HP \/ 20.0 mm\u003cbr\u003e Tiefe\/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e Strombedarf\/Current: 40mA\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307295871165,"sku":"1016012","price":137.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera114dualringmodulator.png?v=1625885540"},{"product_id":"doepfer-a-115-audio-divider","title":"Doepfer A-115 Audio-Divider","description":"\u003cp\u003e\u003cspan\u003eModule A-115 is a four-way frequency divider. The frequency of a signal at the input is halved (half frequency = first sub-octave), quartered (1\/4 frequency = second sub-octave), and so on. In this way, the DIVIDER produces four sub-octaves (F\/2 down to F\/16).\u003cbr\u003e At the output, the A-115 produces a summed mix of the original and the four sub-octaves. There are attenuators to control the amount (ie. Amplitude) of the original signal and each of the sub-octaves.\u003cbr\u003e Bear in mind that the sub-octaves output by the A-115 are all true square waves. At the output there are always four square waves and the original signal available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003ci\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNote:\u003c\/span\u003e The new version of the A-115 (V2 2008) has an additional 3-terminal pin header with associated jumper available. JP3 at the top of the pcb (labelled \"Source #1\") is used to select if the original signal (i.e. the unchanged input signal of the In socket, not converted into rectangle) or the rectangle signal (derived from the input signal) is used for the Orig. control. In the left position of the jumper (towards the front panel) the unchanged original signal is used. In the right position the derived rectangle is used.\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e Strombedarf\/Current: 20mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307296002237,"sku":"1016013","price":113.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera115audiodivider.png?v=1625885542"},{"product_id":"doepfer-a-116-waveform-processor","title":"Doepfer A-116 Waveform Processor","description":"\u003cp\u003eModule A-116 provides voltage-controlled dynamic waveform modification of audio signals. It can produce new waveforms from the standard VCO shapes, and modulate these changes in real time. The signal first of all goes through an input amplifier, which can attenuate the signal as well as amplify it by up to a factor of 2.\u003cbr\u003eAfter the input amplifier, the signal goes through two parallel processors: a clipping circuit, and an asymmetrical amplifier. The processed signals are added together and sent to the output.\u003cbr\u003eClipping-Level and Symmetry amounts are not just manually controllable, but can also be modulated by control voltages, to produce complex, constantly changing waveforms.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBreite\/Width: 8TE \/ 8HP \/ 40.3 mm\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e Tiefe\/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eStrombedarf\/Current: 20mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42307296133309,"sku":"1016014","price":129.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/4175\/9421\/products\/doepfera116waveformprocessor.png?v=1625885544"}],"url":"https:\/\/fr.moogaudio.com\/collections\/modular-synth-gear-gifts-for-eurorack-lovers.oembed","provider":"Moog Audio","version":"1.0","type":"link"}