Our HD and UHD Multicast distribution platforms allow distribution of HDMI video over a 1Gb managed network. The ACM200 Advanced Control Module allows for advanced third party control of our IP50HD, or, IP200UHD / IP250UHD Multicast systems using TCP/IP, RS-232 and IR.
The ACM200 includes a web interface module for control and configuration of the Multicast system and features 'drag and drop' source selection with video preview and independent routing of IR, RS-232, USB/KVM, audio and video.
Pre-built Blustream product drivers simplify Multicast product installation and negate the need for an understanding of complex network infrastructures.
Features
-
Web interface module for configuration and control of IP50HD, or, IP200UHD / IP250UHD Blustream Multicast systems
-
Intuitive 'drag & drop' source selection with video preview feature for active monitoring of system status
-
Advanced signal management for independent routing of IR, RS-232, USB / KVM, audio and video
-
Auto system configuration
-
2 x RJ45 LAN connections to bridge existing network to Multicast video distribution network, resulting in:
-
Better system performance as network traffic is separated
-
No advanced network setup required
-
Independent IP address per LAN connection
-
Allows simplified TCP/IP control of Multicast system
-
RS-232 integration for control of Multicast system
-
IR integration for control of Multicast system
-
Video wall control functionality for up to a maximum of 9 x 9 array
-
PoE (Power over Ethernet) to power Blustream product from a PoE switch
-
Local 12V/2A power supply (optional) should Ethernet switch not support PoE (PSU not supplied)
-
Support for iOS and Android App control
-
3rd Party drivers available for all major home control brands
-
Please note: Compatible with IP50HD, or, IP200UHD / IP250UHD systems only. Please note that for IP50HD systems, a separate ACM200 firmware is required. IP50HD, IP2xxUHD, IP3xxUHD, and IP500UHD systems are not interoperable.
Specifications
-
Ethernet Port: 2 x LAN RJ45 connector (1 x PoE support)
-
RS-232 Serial Port: 1 x DB-9 female
-
RS-232 & I/O Port: 1 x 6-Pin Phoenix connector
-
IR Input Ports: 1 x 3.5mm stereo jack
-
PoE draw: 4.0W (typical), 4.5W (max load)
