DOEPFER A-160-1 CLOCK DIVIDER

DoepferSKU: 1016064

Prix:
Prix réduit$120.00
Special Order
This item is not regularly kept in stock but can be obtained by placing a Special Order. Please note that Special Orders cannot be cancelled or refunded.

Description

Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.
At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.
The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.

Breite/Width: 4 TE / 4 HP / 20.0 mm
Tiefe/Depth: 40 mm (gemessen ab der Rückseite der Frontplatte / measured from the rear side of the front panel)
Strombedarf/Current: 40 mA

Paiement et sécurité

American Express Apple Pay Diners Club Discover Mastercard Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

Vous pourriez aussi aimer

Vu récemment