Glensound MINFERNO/3+ - Single Commentator's Box For Dante Audio Networks Plus Analogue Mic Outputs

Description :

• MinFerno 3+ is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.
• MinFerno 3+ is designed for a single commentator/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.
• The MinFerno 3+ is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works.  It is built to our exacting, rugged & robust standard to make it a reliable piece of broadcast equipment for the busy engineer.
• Redundant Powering Options: The MinFerno 3+ can be powered from any of 3 different sources: 1) PoE on the Primary CAT5 Network link, 2) PoE on the Secondary CAT5 Network link, 3) External 12V DC. Four of rear panel LEDs show the availability of the 3 power sources.
• Primary & Secondary SFP Slots: The SFP (Small Form-Factor Pluggable) fibre slots are standard networking ports that accept standard SFP modules. This means that you decide what type of fibre and connector style you want to use just by the SFP module that you insert. The primary & secondary network circuits allow for glitch free redundancy across both the Fibre & Copper network interfaces.
• Primary & Secondary Copper Network Connections with PoE: Two CAT6 connections on Neutrik Ethercons (that accept standard networking cables) are provided to allow copper connections to local network switches to carry the Dante/ AES67 audio. Two connections are fitted to allow redundant circuits to be used if required. Both of these connectors can accept a PoE power source for providing the power to the MinFerno.
• Input Mode & Gain: One pair of push buttons selects the input type of the front panel XLR to be either microphone, line or microphone with 48V phantom power. 3 LEDs indicate which input mode is selected. Two push buttons are used to alter the gain of the input. LEDs indicate if the gain setting is above or below our pre-configured ‘lineup’ levels. The front panel PPM of course provides an accurate indication of the input level. The gain can also be altered remotely by a web browser pointing at the MinFerno's web page.
• 4 Incoming Audio Volume Controls: On the top panel are up to 5 rotary headphone volume controls. 4 of these are connected to 4 incoming audio circuits from the Dante/ AES67 network. These are normally used for such sources as mixed programme or cue, talkback to director, talkback to producer, talkback to engineer etc.
• Sidetone Volume Control: The 5th front panel rotary headphone volume control is ‘sidetone’. Sidetone is the commentator's own voice in their own ears.
• Headphone Routing: Each of the 5 headphone volume controls has an associated left ear, right ear, both routing switch located next to the volume knob. This single push button switch routes the associated source to just the left, just the right or both channels of the stereo headphone amplifier. To enable the commentator to know how they are routing a circuit the first time a routing switch is pressed, a pair of LEDs on the front panel indicate its current routing arrangement. The next time the routing switch is pressed then the next routing option is selected.
• Robust Mic On and Talkback Buttons: There are up to 4 of large bright illuminated buttons (1 for programme and up to 3 for talkback). These switches route the outgoing microphone circuit onto the 4 different Dante/ AES67 network audio circuits. The operation of these switches (momentary, latching etc) and the interaction of these switches (i.e. pressing a talkback switch mutes the main mic) can be fully configured via the web page.
• Analogue Mic Output: A three pin XLR is on the rear panel containing the analogue output of the mic/line input.  This is switched/muted with the top panel buttons.  This is typically used as an analogue mic output in case the network fails.
• 15 segment LED PPM Meter: Audio input level is indicated on the 15 segment PPM meter.
• Low Noise Microphone Amplifier With Remote Gain: We spent a long time optimising the performance of the THAT corporation microphone amplifier used in the original Inferno and used again on the MinFerno. It features very low noise & distortion circuit that we remote control the gain of in 1dB steps, which allows us to provide the remote webpage gain control as well as the rear panel gain push buttons. We also optimised the circuits to allow correct source impedance switching depending on whether the input has been set as a mic or line input.
• Referee Compressor Limiter: As with all our commentary units, the MinFerno features our very popular Referee compressor limiter circuit. This circuit starts to compress the commentator’s voice gradually and slowly increases the compression ratio as the input level becomes overly high, resulting in a very natural sounding and distortion free audio output capable of taming even the loudest of commentators.
• High Quality Analogue To Digital Converter (ADC): Dante/ AES67 network audio is a digital circuit and as such the best analogue microphone amplifier would be wasted if we hadn’t paired it up with the best analogue to digital converter. The ADC's job is fairly simple, and if you look at our tech spec you’ll see that we’ve made ours work incredibly well.
• Unique Headphone Amplifiers: The commentator’s headphones are a vitally important tool so we take as much care with our headphone amplifiers as with our on air microphones. Our unique headphone amplifier provides the correct output level regardless of the impedance of the attached headphones, meaning that broadcasters can now pick and choose between low impedance ‘cheap’ headphones and high impedance traditional broadcast ones.

Features:

• MinFerno 3+ Commentator’s Box
• Single user Dante commentary box
• System is scalable with multiple commentators as part of a Dante network
• Can connect to any Dante compatible network
• Single low noise mic/line/48V input
• Our popular Referee compressor/limiter keeps even the loudest commentator sounding natural
• Headphone mixer has 4 inputs supplied from the Dante network, plus the local input (sidetone)
• Each headphone input has left/both/right headphone switching
• 3 talkback circuits
• Main mic with a local analogue mic output
• Large illuminated on air and talkback switches
• Multiple power options including PoE, & External DC
• Network connections on Copper (Cat5) and Fibre (SFP slots)
• Primary & Secondary network connections allowing completely transparent network redundancy
• Large bright PPM level meter
• Inbuilt web server for setup and remote control via web browser of mic gain & mic on/off switch
•  DANTE® Audio Network
• AES67 Compliant
• Multi channel, digital media network technology
• Offers compatibility with hundreds of systems from other manufacturers
• Scalable from a pair up to thousands of channels
• Fully redundant glitch free audio transport
• Easy, reliable & free routing software for point to point, or point to multipoint audio routes
• Works across standard network switches

Specs:

• AUDIO INPUT
• Input Type: Neutrik 3 pin XLR
• Input Impedance: Mic: 2k4, Line 100k
• Equivalent Input Noise: 127dBu (22Hz-22KHz) RMS A weighted Terminated with 300 Ohms
• Frequency response:  Mic -2dBu @25Hz flat @50Hz till 22kHz (+/- 0.25dBu).: Line flat till 22kHz
• Distortion at +8dBu:  100Hz = 0.023%, 1kHz =0.012%, 10kHz = 0.014%
• Line Up Gains: Dynamic Mic: 58dB, Mic + Phantom Power: 35dB, Line: 0dB
• Gain Range:Mic: -30 to +15dB, Line: +/-15dB
• Max Input Before Clipping (@line up):Dynamic Mic: +10dBU, Mic+phantom: +18dBu, Line: +18dBu
• AUDIO OUTPUT
• Output type:  Analogue 3 pin XLR
• Switching:  Switched/muted with top panels buttons as configured
• HEADPHONES
• Headphone Impedance: 16-1000 Ohms (auto output level to match impedance)
• Headphone Noise:  -76.6dB @ line up (residual noise)
• Headphone Frequency Response:  >-0.1dB 22Hz to 22kHz
• Headphone THD + Noise (Ref +8dB): 0.008% @ 1kHz
• Connection: 6.35mm & 3.5mm stereo jack plugs
• Headphone Volume Pot Range: +10dB to Off (can be configured +10dB to -30dB)
• Maximum Headphone Output: +16.8dB into 600 Ohms
• POWER
• PoE: Can be powered by PoE on either Copper network interface
• PoE: Complies to IEEE 802.3af-2003 classification class 0
• DC Input: 2.5mm Barrel, Centre +Ve, 9 - 15 Volts
• Consumption: Front Panel Power On LED: Bright Blue
• Rear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources
• PHYSICAL
• Size: 144 x 179 x 76mm (WxDxH)
• Weight: 1.01Kg (2lb3oz)
• Mechanics: All aluminium construction, anodised and laser etched, powder coated sides
• Shipping Carton: Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)
• Shipping Weight: 2.5kg
• ENVIRONMENTAL
• Operating Temperature: 0 to +50°C (32 to 122°F)
• Storage Temperature: -20 to +70°C (-4 to 158°F)
• Relative Humidity: 0 to 95% non-condensing
• INCLUDED ITEMS
• Handbook: Handbook can be downloaded
• Mains Cable: UK & EU only, 2 metre mains plug to IEC
• RJ45 Network Cable: 1 of 2 Metre
• OPTIONAL ITEMS
• Carrying Case: Polypropylene Carrying Case
• SFP Fibre Modules: Multi Mode, Single Mode and Bi-directional on single Fibre available
• External DC Power Supply: Switch mode (100 - 250VAC) desktop style with IEC mains input & 1.5 metre DC output cable
• DANTE/AES67 VERSION
• Physical: 2 x Neutrik Ethercons Cat6 RJ45s & 2 x SFP slots
• Type: Fully redundant primary & secondary circuits
• Sample Frequency: 48K
• Resolution: 24 Bit
• Control & Routing: Via Free Dante Controller
• AES67: Can be configured for AES67
• RAVENNA/AES67 VERSION
• Physical: 2 x Neutrik Ethercons Cat6 RJ45s & 2 x SFP slots
• Type: Fully redundant primary & secondary circuits
• AES67: Yes
• High Sample Rates: 44.1kHz - 192kHz
• PTPv2: Master or Slave, IEEE-1588-2008 standard
• SMPTE ST 2110-30: Yes. Including level C and CX