KENTON PRO-DCB MK3 (14 PINS)

KentonSKU: 1016651

Prix:
Prix réduit$252.00
Special Order
This item is not regularly kept in stock but can be obtained by placing a Special Order. Please note that Special Orders cannot be cancelled or refunded.

Description

KENTON PRO-DCB MK3 (14 PINS)

The Kenton Pro-DCB brings instant MIDI to those much-loved instruments, the Juno-60 and Jupiter-8*. Just plug in and go.

As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.

Please ensure that you purchase the adaptor lead if you have a Jupiter-8 with a 20 pin OP-8 connector.

Juno-60 always has a 14 pin DCB connector - so the included DCB lead is fine.
Juno-6 fitted with Kenton DCB socket upgrade also has 14 pin DCB connector - the included DCB lead is fine.
*Jupiter-8 must have an existing DCB (14 pin) or OP-8 (20 pin) connector - however some Jupiter-8s have neither - you need to check which yours has. If you have the 14 pin DCB connector, the included DCB lead is fine. If you have the 20 pin OP-8 connector you will need the 14 pin to 20 pin adaptor lead also.

Two 3.5mm mono jack to 1/4" mono jack leads for Clock and VCF are included as well as the 14 pin DCB lead

9V switch mode power supply included. Products bought directly from Kenton are supplied with the appropriate power supply for the delivery address. Four types are available, UK / EU / USA / Australia.

  Power:   9-15V DC. Products bought directly from Kenton are supplied with the appropriate power supply for the delivery address. Four types are available, UK / EU / USA / Australia.
  Dimensions:   167 x 97 x 40 mm
  Weight:   600g
  MIDI:   In, Out, Thru
  Analogue Outputs:   Clock (0-5v)
Aux (0-12.5v)
  Digital Inputs:   DCB (In and Out)
       
      Please refer to the manual for more details
  • MIDI In/Out and Thru Sockets
  • Aux output (for VCF or VCA control)
  • Clock Output (for syncing the arpeggiator)
  • Fully programmable, MIDI syncable, built-in LFO with 9 waveshapes, including S&H.
  • DCB socket (for connection to keyboard)
  • Settings stored in non-volatile memory
  • Dimensions 165 x 98 x 50mm
  • Weight 700 grams
  • Power Supply 9v DC centre positive
  • Supplied with a 1.8 metre cable which has a 14 pin DCB plug as shown below.

Paiement et sécurité

American Express Apple Pay Diners Club Discover Mastercard Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

Vous pourriez aussi aimer

Vu récemment