Michigan Synth Works XVI Euro - Black.
Michigan Synth Works XVI Euro Black Panel
XVI Euro is a 16 channel eurorack control surface.
Features:
Long throw LED 60mm faders
0-5V, 0-10V, -5 to +5V CV ranges per channel
USB Powered (MINI USB, Cable included)
Fully analog CV outputs
I2C communications as leader or follower
2x Fully buffered I2C Ports for longer cable runs. (3.5mm TRS)
USB MIDI and TRS B MIDI (can be used simultaneously with different mappings)
I2C, MIDI, and CV can be used simultaneously
44 HP
Different color LEDs available separately
IMPORTANT: This device requires a MiniUSB 5V power supply which supplies 500mA or more (not included) for stand alone use. It is NOT recommend for use with passive USB hubs, only powered ones.
Other Important note: As of Serial#4161, all devices have TRS MIDI A. The spec has been official for a while now so all MiSW devices will confirm to TRS MIDI A. Both types of cables will be available in the shop
Basic Usage instructions
Front:
Voltage Select switches: Independent for each channel. Does NOT affect MIDI/I2C data
Slider LED color: To change the LED color, simply remove the cap and rotate the square LED 180s. Do NOT force the LED back in, it should slide in easily, may require wiggling.
Side:
USB: Mini USB connection for power and/or connection to computer. For use, simply connect to a 5V USB wall wart, 150 mA min (not included). The device is a class compliant MIDI device and requires no drivers.
I2C: 2 buffered I2C ports. Can be used as a small I2C hub
Disassembly: Simply remove the 4 screws from the side without the connections, remove the side plate, and slide out the bottom of the device
PCB Rear:
Power backpack: This is the power supply for the device. When converting to the eurorack configuration simply remove. There is a standard 10pin power header below.
Includes 2m USB MINI Cable
New 2.0 Firmware!
Online parameter editor: https://misw.us/editor
Edit Midi CC# per channel on USB MIDI and TRS MIDI Outputs
Set MIDI CC Range
Adjust I2C Leader/Follower Mode
Adjust boot delay
Improved I2C stability for Disting
USB MIDI thru to TRS MIDI