WMD Pro Output

WMD DevicesSKU: 1017241

Price:
Sale price$199.00 Regular price$217.99Save $18.99Found a better price?
In Stock This item is in stock and typically ships within 1-2 business days.
Contact Our Specialists Need specific product information or not sure where to start? Our in-house specialists are here to help you make the right decision. With extensive knowledge of our products, they are ready and eager to assist you.

Description

The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.

The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.

 Controls and I/O

Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.

Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.

The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.

With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.

Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.

+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.

Other Notable Things The Pro Output is 6 HP. Current consumption is 60mA for the +12 rail; 60mA for the -12 rail.

The depth from the back of the panel is 39mm.

The Pro Output is warranted for 12 months after purchase. But please contact us if you ever have problems. We will take care of you.

Estimate shipping

Request an ETA on: WMD Pro Output

ETA are subject to change. By clicking submit I understand the ETA might change once the order comes through.
Thank you for submitting your ETA Request! Our sales team will reach out with an ETA shortly.

You may also like

Recently viewed

Free Shipping

We offer Free Shipping on all orders over 199$. Conditions may apply.

Gift Card

Looking for a perfect last minute gift? Gift cards can be redeemed online or in store

Quick Financing

Shop now, pay later with Flexiti! Get approved in less than 60 seconds

100% secure

SSL (Secure Socket Layer) technology to encrypt data during the checkout process