Manipulateur de tension à quatre canaux très pratique pour la mise à l'échelle, l'atténuation, l'inversion et le mélange de signaux. L'offset peut également être généré par le SISM et la fonction slice extrait la somme de toutes les tensions positives ou négatives. De nombreuses diodes électroluminescentes indiquent ce qui se passe avec votre signal.
Le SISM est un manipulateur de tension à 4 canaux qui peut mettre à l'échelle, inverser, atténuer, décaler (offset dc), mélanger, diviser et découper vos signaux CV et audio.
Une pléthore de LED rouges et bleues (14) indique exactement ce que fait chaque canal et chaque jack de sortie : rouge = tension négative, bleu = tension positive.
Chaque canal est indépendant et dispose d'un jack d'entrée, d'un jack de sortie, d'un bouton pour atténuer/inverser (Scale) et d'un bouton pour appliquer un décalage CC positif ou négatif (Shift).
Quatre prises situées dans la partie inférieure permettent de combiner les quatre canaux de différentes manières. Mix est un mélange direct des quatre entrées décalées, Switched Mix est un mélange de tous les canaux qui n'ont rien branché sur la prise OUT, Positive Slice est la somme de toutes les tensions de sortie supérieures à zéro volt, et Negative Slice est la somme de toutes les tensions négatives.
En décalant certains canaux vers le positif et d'autres vers le négatif, les prises + Slice et - Slice peuvent être utilisées comme sorties de sous-mixage. De plus, en envoyant une onde triangulaire lente dans un canal, les canaux restants peuvent être transformés en "panoramique sale" entre les prises Slice : les signaux sont redressés par demi-onde lorsqu'ils passent entre les deux sorties.
Les canaux 1+2 et 3+4 sont normalisés ensemble sur les jacks d'entrée, ce qui est pratique pour diviser un signal en deux ou plusieurs formes modifiées. Des cavaliers à l'arrière permettent de désactiver cette normalisation.
Chaque canal dispose également d'un cavalier permettant de rendre le bouton Scale unipolaire (pas d'inversion, atténuation uniquement). Ceci est utile pour mélanger de l'audio au lieu de CV. Un collecteur de connexion permet d'atténuer le signal (utile pour régler avec précision une tension telle que 1V/oct).
Des collecteurs d'entrée et de sortie pour la connexion au QCD, au QPLFO, au VCA Matrix ou à des modules d'autres fabricants tels que Toppobrillo Mixiplexer ou Circuit Abbey Intermix.
Caractéristiques de base
- Quatre canaux de traitement de la tension indépendants, avec quatre sorties de mixage/mélange.
- Chaque canal dispose de :
- un jack d'entrée
- Bouton d'échelle (de l'unité inversée, à zéro, à l'unité)
- Bouton de décalage (ajoute/soustrait le décalage CC de -9V à +9V)
- Prise de sortie
- DEL rouges et bleues indiquant la tension + ou -, ainsi que l'intensité
- La prise MIX émet la somme de tous les canaux
- La prise MIX SWITCH émet la somme de tous les canaux lorsque rien n'est branché sur leur prise de sortie.
- Le jack + SLICE émet la partie positive du mélange (tensions supérieures à 0V)
- - La prise SLICE émet la partie négative du mélange (tensions inférieures à 0 V).
- Des diodes rouges et bleues sur les quatre prises de mixage indiquent ce que fait le signal.
Fonctions avancées
- Les canaux 1+2 et 3+4 sont normalisés ensemble à l'entrée, de sorte que le branchement sur le canal 1 (ou 3) divise le signal : Un cavalier permet de désactiver cette normalisation.
- Le bouton d'échelle a trois plages qui peuvent être sélectionnées à l'aide de cavaliers :
- Bi-polaire : -1x à +1x (inversion unité à unité) -par défaut
- Unipolaire : 0 à +1x (curseur de niveau)
- Boost : 0 à 2x (doublement du gain de tension)
- En-tête d'entrée (2x4) pour connecter la sortie d'un QCD ou d'un QPLFO aux entrées du SISM. Le fait de brancher les jacks d'entrée annule le signal sur le collecteur.
- En-tête de sortie (2x4) pour la connexion à l'entrée d'une matrice VCA ou d'un autre module compatible.
- Tête de sortie PAD (2x4) pour la connexion à un module de sortie qui applique un pad (atténuation) prédéfini à chaque canal.
Taille du module :
Le SISM a une puissance de 12HP et une profondeur de 0,86 pouces (22mm).
Consommation électrique :
- Rail +12V : 51mA max
- Rail -12V : 51mA max