Le module d'extension Multimode Envelope introduit un certain nombre d'éléments utiles, notamment le contrôle de la tension, les sorties de déclenchement et le contrôle du comportement.
Commandes et E/S d'extension
Entrées CV et boutons d'atténuation - Ces entrées CV et atténuateurs bipolaires dédiés permettent de contrôler massivement la forme de l'enveloppe en permettant à chaque segment d'être contrôlé par CV. Les atténuateurs bipolaires permettent d'inverser le signal source. Une position à 12 heures ne produit aucun changement par rapport à la tension de contrôle. Tourner dans le sens des aiguilles d'une montre pour un fonctionnement normal, dans le sens inverse des aiguilles d'une montre pour un contrôle CV inversé. Chaque entrée est calibrée de manière à ce que, lorsqu'elle est réglée au maximum dans le sens horaire, un volt double la vitesse du segment.
EOA, EOD, EOS, EOR - Ces déclencheurs de sortie se déclenchent lorsque le segment correspondant arrive à son terme. Utiles pour déclencher d'autres modules pour des temporisations complexes. La longueur de déclenchement standard est de 10 ms. Elle peut être ajustée à l'arrière du module.
Retrig - Cette entrée de déclenchement provoque le retour de l'enveloppe au segment d'attaque si l'enveloppe est déjà en cours. Si l'enveloppe n'est pas en cours d'exécution (aucun voyant allumé), les redéclenchements seront ignorés.
Hold - Appliquer un signal à cette entrée pour mettre l'enveloppe en pause ou en attente. Cette fonction est utilisée pour les pas de l'enveloppe ou l'arrêt du mouvement pendant les patches complexes.
ADR TimeScale - Cette entrée CV affecte la vitesse des segments Attack, Decay et Release de manière égale. L'enveloppe multimode est conçue de manière à ce que cette entrée permette à chaque segment de se rapprocher raisonnablement de 1V/octave.
Reset on Gate - Ce commutateur détermine si l'enveloppe se réinitialise à 0 volt lorsqu'un nouveau trigger ou gate est appliqué si la sortie est supérieure à 0 volt. Il n'affecte pas la fonction Retrig.
Construction, alimentation et garantie
L'enveloppe Multimode est un module hybride de génération d'enveloppe numérique et analogique.
Consommation de courant :
+12 Rail : 49mA, 104mA avec l'extension
-12 Rail : 27mA, 38mA avec l'extension
Toutes les entrées CV sont d'une impédance de 100k. Les sorties de déclenchement sont d'une impédance de 1k, les sorties CV sont d'une impédance de 470 ohms.
L'enveloppe multimode a une largeur de 8 HP, l'extension a une largeur de 6 HP. Un câble à 20 broches est fourni pour connecter les deux.
Garantie - Nous garantissons l'enveloppe multimode et les modules d'extension contre tout défaut de fabrication pendant un an à compter de la date d'achat. N'hésitez pas à nous faire part de vos problèmes. Nous prendrons toujours soin de vous.